NATURAL MOVEMENT The Stone Federation advises on how to create a long-lasting natural stone floor.


In the world of interior design, in a sector where aesthetics leads the way and individuality is a unique selling point, natural stone is the ideal material.


Quarried and mined from the earth, bearing a unique characteristic that is the result of complex geological processes, natural stone offers the interior designer more than just a material, it offers a story.


No two pieces of natural stone will be exactly the same, and when embraced, this unique material can provide a wealth of options in both texture and colour.


Natural stone has a fantastic track record of delivering beautiful, hardwearing floors. To help architects, interior designers and contractors take full advantage of the potential that natural stone provides, we would always encourage these professionals to consult expert guidance and the relevant British or European Standards.


Like all building materials, natural stone will be impacted by changes in environmental conditions (heat, impact and traffic) which is why it’s important to provide stress-relieving movement joints.


When designing a natural stone floor, asking the following questions will help you deliver a durable scheme and avoid failures in the floor.


This advice has been extracted from Stone Federation’s ‘Code of Practice for the Design & Installation of Natural Stone Flooring.


DO I NEED MOVEMENT JOINTS? Where the distance between restraining surfaces including perimeter walls exceeds 2m a perimeter movement joint must be installed. Intermediate movement joints are required where the distance exceeds 10m. With underfloor heating the natural stone flooring should be divided into bays of up to 40m² with a maximum bay length of 8m.


WILL THE FLOOR BE SUBJECT TO


LIGHT OR HEAVY LOADING? The type of movement joint required is determined by the nature of the ‘traffic load’ that the floor with be exposed to.


Light loading is defined as normal, low-density pedestrian traffic with lightweight, soft wheeled trolleys such as in domestic and office locations.


Heavy loading is defined as high density pedestrian traffic and/or heavy load, static, moving, dropped or dragged areas.


If the floor will be exposed to low loading, or in a low traffic and impact area, a sealant would provide a suitable movement joint. If the floor is in a higher traffic environment a pre-formed movement joint, typically comprising metal side plates with a flexible synthetic rubber core would be suitable.


IS THERE UNDERFLOOR HEATING? If there is an underfloor heating system, the pipes or cables should be located to ensure that the system is contained within the pattern of the movement joints. There should also


16 | STONE & CERAMIC


be an assessment undertaken of the likely temperature range that the floor will be exposed to.


HAVE YOU TAKEN DRYING


SHRINKAGE INTO ACCOUNT? Stone, like all finishing materials, reflects movements arising from supporting substrates. In the early period of a floor’s life cycle, movement occurs primarily from the drying shrinkage of the slab and screed. The Concrete Society indicates that, as a rule of thumb, a typical 10m span slab will experience drying shrinkage of 3.0mm irrespective of design, depth, or amount of reinforcement used.


WHAT COLOUR SEALANT IS BEST? As with pointing and grouting materials, because many natural stones absorb, the sealant colour chosen should be similar to the stone to avoid migration of the sealant colour and discolouration of the stone.


For more information on movement joints and natural stone flooring in general, architects, interior designers and clients can purchase a copy of The Code for the Design and Installation of Natural Stone Flooring by emailing enquiries@stonefed.org.uk.


enquiries@stonefed.org.uk www.stonefed.org.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48