SAVING VALUABLE TIME Fast-track products can help contractors beat the clock on retail installations, explains F. Ball.
When working in retail environments, flooring contractors often face pressure to complete work as quickly as possible to minimise the time that a store is closed or areas have to remain out of service to members of the public.
Fortunately, advancements in subfloor preparation products, including fast-drying levelling compounds and waterproof surface membranes, as well as adhesives, now mean that floorcoverings can be installed in as little as a day, whereas it would have once taken several days.
The fastest setting floor levelling compounds on the market are 'walk-on' hard in 30 minutes and ready to receive new floorcoverings from 45 minutes. Levelling compounds that can be applied directly over old adhesive residues, such as F. Ball and Co. Ltd.’s Stopgap 1200 Pro, offer another timesaving solution where floorcovering installations are part of a refurbishment, removing the need for mechanical preparation.
Adhesives are also available that build up a strong enough bond to allow for foot-traffic in less than an hour after the application of floorcoverings. Using solvent-free and low odour products to install floorcoverings in enclosed spaces will mean that surrounding areas can remain open to the public while work takes place, minimising disruption in busy retail environments.
F. BALL PRODUCTS SPARK
CONVERSATIONS Carpet and flooring specialist, Flooring by Henton opted for F. Ball’s Stopgap 1200 Pro and its Styccobond F48 Plus fibre- reinforced high temperature grade vinyl adhesive to achieve a high quality LVT floor finish in the company’s own showroom, providing a showcase of its workmanship and attention to detail for visitors.
As well as requiring a perfectly smooth subfloor to optimise the aesthetic appearance of luxury vinyl planks, Flooring by Henton needed a vinyl adhesive that develops a high bond strength to hold the planks in place when subjected to very high temperatures, caused by solar gain through the showroom’s floor to ceiling windows.
The first point of action for contractors was to remove old carpet, LVT and wood floorcoverings from the 90m2
floor of
the showroom. A moisture test was then conducted using a digital hygrometer, which indicated the relative humidity (RH) level of the subfloor was 55%. As the RH levels did not exceed the 75% maximum threshold, the application of a waterproof surface membrane was not required to prevent excess moisture potentially causing floor failure.
Contractors next applied Stopgap 1200 Pro levelling compound over the entire subfloor to create a perfectly smooth base for the receipt of floorcoverings. As well as being suitable for use over old adhesive residues, the two- component levelling compound is also fast-drying and fast-setting – it is walk-on hard in as little as 60 minutes and ready to receive floorcoverings from four hours. When applied over old adhesive residues there is no need to prime beforehand, saving further time.
twitter.com/TContractFloors
With a large glass front, the main area of the showroom is prone to high temperatures as a result of solar gain. Therefore, F. Ball’s Styccobond F48 PLUS high temperature grade vinyl adhesive was selected to install wood-effect vinyl planks. Floorcoverings exposed to high temperatures can expand and contract significantly, which can lead to tenting in vinyl planks and tiles and gapping at the edges of floorcoverings over time. When cured, Styccobond F48 PLUS develops the high bond strength required to hold floorcoverings firmly in place when exposed to extreme temperatures.
Fibres in the adhesive provide high initial grab to help prevent lateral movement of floorcoverings, an advantage when working with vinyl tiles or planks. It is also fast-drying, allowing floorcoverings to be installed in as little as five minutes after application, and solvent free, meaning the showroom could remain open to customers during the final installation of vinyl planks, whilst the majority of the refurbishment had been completed over a bank holiday weekend.
Flooring by Henton Director James Scott said: “Using Stopgap 1200 Pro and Styccobond F48 allowed us to finish the job quickly and remain open while the work was taking place. This created a good talking point for customers coming in and out of the shop, who were intrigued to see floor fitters in action. We always use F. Ball products, because they never let us down. We also get good advice from our local Technical Representative, Phil Nightingale, who provided support throughout the showroom refurbishment.”
www.f-ball.com SHOPPING CENTRES & RETAIL | 39
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46
