SAFETY IN THE PLANT
facilities’ health and safety monitoring. It recently signed a deal with Swiss robotics company ANYbotics on autonomous robotics solutions and, in June 2023, the fi rst ANYmal robot arrived to Outokumpu’s site in Krefeld, Germany. ANYmal robotics support
S
Outokumpu’s ambitious safety strategy and vision of building the safest working environment within the steel industry. In 2023, this translates into a target of less than 1.8 recordable injuries per one million working hours. “Use of AI and robotics for safety management is one of the cornerstones of our safety strategy. ANYbotics’ robotics technology will help us to increase safety by reducing employee exposure to hazardous substances and environments, optimise production through preventive maintenance, and decrease environmental impacts. In 2022, we started to research the possibilities to use AI in safety management. Safety robotics emerged as the best alternative and ANYbotics as the best supplier for the robotics. We are pleased to collaborate with the fi rm to support our safety journey onwards”, says T orsten Piniek, vice president, Health & Safety at Outokumpu. Since 2016, ANYbotics has developed
innovative, intelligent and integrated robotic solutions that improve employees’ lives, increase productivity, and support more sustainable industrial facilities. “Outokumpu is an excellent partner to pioneer the deployment of ANYmal in the metals sector. T e fi rm’s site in Krefeld poses particular challenges in dealing with its tough environmental conditions and hazardous substances where the robot can prove its industrial ruggedness, autonomy, and end-to-end integration”, says Luca Niccolini, lead metals at ANYbotics.
REDUCING HUMAN EXPOSURE Outokumpu has currently one robot already deployed at its site in Germany. T e pilot will be expanded to its sites in Finland and Sweden with in total three ANYmal robots to be deployed. T e company estimates that by transferring inspection tasks to the robot, employees’ exposure time to hazardous substances can be reduced by more than 80%
tainless steel expert Outokumpu will start to use artifi cial intelligence (AI) and safety inspection robots to improve and digitise the company’s
ANYmal robot doing the daily safety monitoring tour at Outokumpu’s site in Krefeld, Germany
Steel industry project showcases the use robotics in safety management – supporting the vision of achieving the lowest accident frequency rate in the industry by 2025
RE ROBOTSDUCE RISK
and possibly hazardous repairs in maintenance could be reduced by 20%. “T e robots will have many tasks
– reducing the time employees spend inspecting acid areas and reducing the risk of fi res due to overheating of bearings and motors, for example. In addition, the robots can shorten malfunction times since defects can be detected at an early stage through
temperature and sound profi le measurements before a failure occurs. However, they will not replace human workforce but instead automate some parts of the inspection work. T e introduction of the new robots is a further step towards even more safe environment and increase the effi ciency of routine processes,” says T orsten Piniek.
www.engineerlive.com 37
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
