WASTE TO ENERGY
FLOW METERS OPTIMISE WASTE-TO-ENERGY BOILER MEASUREMENT FCI’s ST80, ST100 and MT100 Series
E
ngineers challenged with designing or operating waste-to-energy incineration plants will find the ST80, ST100 and MT100 Thermal Mass Flow Meters from Fluid Components International (FCI) offer them accuracy, repeatability, ease of installation and low maintenance to enhance plant performance while driving costs
down. Waste incineration plants (WIP) applying waste-to-energy (WTE) technologies provide an economical and decreased waste footprint alternative to conventional organic waste disposal. WIPs convert their waste streams into electrical power by burning the waste to heat steam boilers, which in turn drive turbine electric power generators. The WIP combustion process uses forced draft primary air and
grate air, and in some systems secondary air, that all must be measured for efficient mixing and boiler control. All WIP systems require the measurement of the air mass
Thermal Mass Flow Meters are the ideal solutions to measuring WIP boiler system intake air and back- end flue gasses. In high-temperature, dirty plants with fly ash residue, these thermal flow meters excel with a rugged, no-moving parts design that is resistant to clogging and fouling over a long life.
The compact thermal dispersion mass flow meters are direct mass flow instruments that do not require the addition of costly temperature or pressure sensors, or their added wire-runs and pipe penetrations. Their insertion-style configuration is the easiest, most cost-effective solution to install for the larger line sizes common in waste-to-energy incineration plants.
flow rate to control the boiler properly and treat end-of-process hot flue gases.
For more information visit
www.fluidcomponents.com
“The Shock Pulse Generators have reduced our online cleaning costs by two thirds.” Andree Michaelis Plant Manager Wood-fired power plant Silbitz GmbH &
Co.KG
Shock Pulse Generator for highly efficient online boiler cleaning
Significant increase of boiler efficiency and plant availability Exceptional removal of slag and fly ash deposits Universally applicable from furnace to economizer No thermal abrasion or damaging of boiler tubes Modular and compact system, controlled by PLC Reduced cost of investment, operation and maintenance Proven technology with over 600 installations in 20+ countries
Plant application range: WtE, Biomass, Sewage Sludge, Hazardous Waste, Coal, Filters, Cement Kilns, HRSG
Explosion Power GmbH
www.explosionpower.ch
Hardstrasse 11
info@explosionpower.ch
CH-5702 Niederlenz +41 62 886 50 80
www.engineerlive.com 45
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
