COATING TECHNOLOGY
A 3D printed PA-12 part resulting from the particle coating process
The coating process was designed in such a
way that it would be one-step, sustainable, and scalable. The key to the process is the use of supercritical CO2 as a solvent.
For the coloured materials,
the researchers used Isobornyl methacrylate and dye methacrylate monomers to form the coating, chosen because the resulting polymer is coloured and has similar thermal properties to PA-12. The simple yet effective approach provides added functionality to the coating, with the coloured shell polymer able to be designed to match the mechanical and thermal properties of the printing polymer. “The coating process does not
inhibit the printing process,” Krumins adds. “After our production process is finished we get polymeric powder that is dry and ready to use. In terms of printing resolution we think that we are within standard printing resolution, same with accuracy and time, hence our materials can be used with little to no change to the overall printing process.” So, why does it benefit
manufacturers to add colour during the printing process as opposed to afterwards? “The dyeing process currently
necessitates large machinery which can be expensive and can take up a large amount of space,” explains Krumins. “Additionally, the process can last anywhere from several
hours a day, meaning that the user is adding considerably to their overall production time. Companies that do not have the machinery needed for their dyeing needs can send them to post-processing services, however this can take even longer considering the parts need to be posted. With our materials, these steps in the production process can be skipped.”
SAY GOODBYE TO MOULD In addition to the aesthetic colour benefits for printed components, the new technique also delivers other desirable properties, in particular, anti-mould and fungal properties. Currently, objects made using PA-12 cannot be used in moist environments due to the growth of mould and fungi. The new shell coating can be used to develop coatings that prevent this from happening, opening up new possibilities for the use of 3D printed objects in new areas. “The anti-mould and anti-fungal
properties of our materials could open a wide range of applications for SLS,” Krumins explains. “For example, we think that this could be used in food packaging situations such as factory tooling, maritime applications like interior and exterior polymer-based
parts in ships and buoys, and in healthcare. These would all have to be separately tested but currently PA-12 is readily ‘biofouled’ in many waterborne environments meaning that bacteria, fungi and so on grow on PA-12 very rapidly. Our materials will allow users to have all the benefits of SLS along with the knowledge that bacteria and fungi will grow to a much lesser extent on the parts that they produce.”
INTEGRATION INTO CURRENT OFFERINGS According to Krumins, the team’s coated materials can be easily used in commercial printers, with only very minor changes needed, such as laser power, which is expected. And, the next steps for the project are promising. “We are currently in talks with a
few potential industrial partners,” Krumins says. “The next steps towards commercialisation are to form an agreement or partnership with a materials or printer manufacturer, scale up production to pilot plant level, and to continue developing new functionalities for SLS materials.”
For more information visit
www.nottingham.ac.uk
www.engineerlive.com 25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
