search.noResults

search.searching

note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
| GUEST BLOGGER |


HOISTING EQUIPMENT Remember, there is a different duty cycle rating for the hoist than for the bridge. Here in the states that might be from the Hoist Manufacturers Institute (HMI), another MHI trade group. Confusingly, CMAA and HMI guidelines don’t lineup exactly, as the CMAA ratings system doesn’t state the equivalent hoist rating that should be used for a particular duty crane. Make sure to compare the hoist “H-rating” such as H4, H5, or H6, between competing proposals. Tere is a way to use the lifespan of bearings to get the two to tally. For example, if a Class D crane has a bearing life rating of X, a comparison can be made with HMI documentation. In Europe and other regions, different guidance is at play. If there’s apparent consistency between CMAA, the end user, HMI and all the front-running bidders with regards to the duty cycles of the crane and hoist in question, there’s a good chance everyone is on the same page and proposals will need to be differentiated elsewhere. Again, if there are discrepancies, address them. Abuse of cranes can typically be seen in the brakes, wire rope, hoist, bridge and trolley brake (pretty much in that order) so variation between proposals is a critical determinate.


Another thing to look at closely is trolley and


bridge trucks; a purchasing decision maker of an overhead crane should demand rotating end trucks. Te alternative (fixed axle) is a low budget solution and will result in those problems in future that we all want to avoid. An overhead crane by its very nature comes into its own over a lifetime of ownership. It is a long-term investment and the components need to be consistent with that ethos. Also compare lead times and details about delivery.


It’s perfectly acceptable to ask for reference letters from other companies who might have recently sourced a crane from a supplier one is considering. Did they deliver as their proposal suggested? If not, what problems were encountered and what reasons were given? Did they plan site access and keep disruption to a minimum? Did they accurately estimate the installation time? Beware of the parts commonality theory. Te specification shouldn’t have been based on brands or products that are already in operation at the facility and nor should the proposals. It’s a myth that getting the same brand of crane that has been used elsewhere or sourcing a like-for-like replacement as the predecessor, is advantageous from any viewpoint. I once lost out on a bid because the crane owner wanted parts commonality with an existing crane. It turned out that given the evolution of the product, the only commonality he ended up with was the paint! Motors, gearboxes and brakes, etc. that he hoped would be consistent were all different.


MAY THE SOURCE BE WITH YOU Crane builders should be quizzed on where they source their parts. At Ace, for example, we make our own gears and gearboxes, a unique feature of which is a horizontal split so they are easy to rebuild whilst on the crane. Most gearboxes on the market have a split in the side so they have to be removed and rebuilt offsite. Where possible, we believe in making parts serviceable on the crane and that’s something I’d urge buyers to look for in proposals.


“Has the crane builder accounted for all the requirements outlined in the spec? Have they noted the runway dimensions? What about the unique production line requirements of the facility?”


It’s not all about manufacturing in-house, however.


Conversely, we source only branded controls, motors and brakes from leading manufacturers in those product sectors. Further, they are all based in the U.S., where parts are readily available. Look at proposals carefully and consider the problems that could be encountered if parts are originally from Europe and not even stocked in North America. If there’s a breakdown, an item could take two weeks to ship. For similar reasons, on heavier-duty cranes, stick to imperial measurement wire rope that can be readily sourced domestically. If a supplier is working with metric wire rope, it might be difficult to locate the manufacturer if there is a problem with it. In all cases, where a crane builder says they have got stock or access to the original source, ask them to prove it. Take the time to visit the supply warehouse and speak to representatives of their supply chain to verify the information. Tat would also serve as a good way to check on the location of suppliers. Is the address on the proposal where the parts are stored or is it only a satellite office? Closer isn’t always better—a strong bid from someone two hours further away than a company that has submitted a weak one will win every day—but there better be a good reason to use a New York-based supplier for a standard crane installation in California. Tere’s much to be gained by choosing the right supplier of the right crane. As the last two articles have explored, issue a detailed specification and be diligent when comparing proposals. <


To read more from Tad Dunville and Ace World Companies, visit their blog at www.aceworldcompanies. com/category/blog/


INDUSTRIAL LIFTING EXCHANGE


DECEMBER – JANUARY 2018


33


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36