iCone® is a fully automatic and interactive system. Not only does it possess all the advantages of a conventional Cone Calorimeter, it also features an interactive and intuitive interface, flexible control options, and built­in data acquisition technology and reporting with the user­friendly ConeCalc software. It has been designed using FTT’s decades of experience in calorimetry and incorporates many new features not seen by fire testing laboratories up until now. It is perceived as the new benchmark in calorimetry.


Directly measured properties include: • Rate of Heat Release • Time to Ignition • Critical Ignition Flux • Mass Loss Rates • Smoke Release Rates • Effective Heat of Combustion • Rates of Toxic Gas Release (e.g. carbon oxides)


According to EN 45545­2, the electrical heater within the Cone Calorimeter must impose two different irradiance levels: 25kW/m2


and 50kW/m2 . FIRE TESTING TECHNOLOGY


Figure 1: FTT ISO 5660­1 iCone® Calorimeter


7


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24