Summary of referenced test methods available from FTT: EN 45545­2


test method ref. T01 T02 T03


T04 T05 T06


T09.01 T09.02 T09.03­04 T10 T11 T12 T13 T14 T15 T16 T17 Standard


EN ISO 4589­2 ISO 5658­2 ISO 5660­1


EN ISO 9239­1 EN ISO 11925­2 ISO 9705­2


EN 60332­1­2 EN 60332­3­24 Short description


Determination of burning behaviour by oxygen index – Part 2: Ambient temperature test Lateral flame spread


Reaction­to­fire tests – Heat release, smoke production and mass loss rate – Part 1: Heat release rate (cone calorimeter method)


Radiant panel test for horizontal flame spread of floorings Ignition when subjected to direct impingement of flame Furniture calorimeter vandalised seat


Tests on electric and optical fibre cables under fire conditions – Part 1­2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre­mixed flame


Common test methods for cables under fire conditions – Test for vertical flame spread of vertically­mounted bunched wires or cables – Part 2­4: Procedures – Category C


Requirement set R22, R23, R24


R1, R2, R3, R4, R7, R11, R12, R17 R1, R2, R3, R5, R6, R7, R8, R9, R10,


R11, R12, R17, R19, R20, R21 R8, R10 R4, R5 R18


R15, R16 R15, R16 EN 50305­9.1:2002 Railway applications – Railways rolling stock cables having special fire performance – Test methods R15, R16 EN ISO 5659­2


EN 45545­2:2013 Annex C


NF X70­100­1 NF X70­100­2


EN 61034­2 EN 13501


(EN ISO 1182 and EN ISO 1716:2010)


EN 50305 EN 60695­2­11 EN 60695­11­10 Plastics – Smoke generation – Part 2: Determination of optical density by a single­chamber test Gas analysis in the smoke chamber EN ISO 5659­2, using FTIR technique Gas analysis for the 8 gases described on 3.1.5


Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements


Fire classification of construction products and building elements – Part 1: Classification using test data from reaction to fire tests


FTT Instrument EN ISO 4589­2 Oxygen Index Test


ISO 5658­2 Lateral Flame Spread Apparatus iCone® Calorimeter, Dual Cone Calorimeter


EN ISO 9239­1 Flooring Radiant Panel


EN ISO 11925­2 Single­Flame Source Test Apparatus ISO 9705­2 Large Scale Calorimeter


EN 60332­1 Vertical Flame Propagation Test for a Single Cable


EN 60332­3 Vertical Flame Propagation Test for Bunched Cables


EN 60332­3 Vertical Flame Propagation Test for Bunched Cables


R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, NBS Smoke Density Chamber R11, R12, R17, R20, R21, R22, R23


R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, NBS Smoke Density Chamber with FTIR Gas Analyser R11, R12, R17, R20, R21


R22, R23 R15, R16 R13 Railway applications – Railway rolling stock cables having special fire performance – test methods R15, R16


Fire hazard testing – Part 2­11: Glowing/hot­wire based test methods Glow­wire flammability test method for end­products


Fire hazard testing – Part 11­10: Test flames – 50 W horizontal and vertical flame test methods R25 R26 EN 50267­2­3 Cable Toxicity Test Apparatus 3M Cube Smoke Test Apparatus


EN ISO 1182 Non­Combustibility Apparatus, EN ISO 1716 Bomb Calorimeter


EN 60332­3 Vertical Flame Propagation Test for Bunched Cables


EN 60695­2­11 Glow Wire Test Apparatus Vertical Flame Test Apparatus


Page no.


19 10 6


12 11 8


13 13 13 14 14 16 18


20 21


13 19 20


22


EN 45545-2:2013 – NEW F I R E C LASSIFICATIONS AND FIRE TES T METHODS FOR THE EUROPEAN RAILWAY INDUSTRY


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24