Feature Communications & networking The opportunity for a bumper harvest


According to Gareth Johnston, global wireless product manager, ABB, combining wireless communications with energy harvesting technologies paves the way for the first generation of truly autonomous instrumentation


T


oday’s process industries are more highly automated and instrumented than ever, with instrumentation playing a key role in both process control, and mon- itoring the health of equipment to min- imise downtime.


Since wiring and installation can add up to almost 90% of the total cost of a typical industrial device, it makes sound financial sense to explore the option of using wireless technology. Wireless devices used to be largely con- fined to specialist applications in remote installations, such as water dis- tribution or oil and gas. However, the arrival of the WirelessHART protocol means industry now has an interna- tional standard that enables wireless instruments to communicate a wealth of standardised information throughout plant networks.


Reliability is crucial, and the meshed architecture of WirelessHART networks provides a robust solution that can re- route information to bypass malfunc- tioning nodes and provide a secure service. The downside of this approach is that all the instruments need to act as relays, passing information around the network, which means that they need to power up more frequently, which impacts on battery life.


If maintenance engineers have to spend their time replacing batteries, this can soon threaten to offset the upfront savings of using wireless devices. There are strategies for min- imising power consumption and max- imising battery life, but there is also an alternative that can virtually eliminate the routine replacement of batteries to create truly autonomous devices. That alternative is energy harvesting (EH). EH relies on harnessing the ample “spare” energy typically lurking in almost every industrial installation. Energy sources include hot and cold processes, solar radiation, vibration and kinetic energy from moving parts, which can all be converted into usable electrical power.


The most promising energy harvest- ing technologies convert solar radia- tion, thermoelectric and kinetic energy into electricity using photovoltaics, thermoelectric generators (TEGs) and kinetic converters respectively. Photovoltaic technology is robust and well-established. However, while


Process & Control JULY 2012


the intensity of the energy harvested in outdoor installations can reach 1,000W/m2


often only manage 1W/m2


, typical indoor installations . This limits


the practical situations in which photo- voltaics can be used.


TEGs rely on the Seebeck effect to harvest electrical energy from thermal gradients between hot or cold processes and the ambient surroundings. They are not very efficient (usually less than 1%) but are stable enough to deliver the reliability that process operators need. Most process industries are also popu- lated by a ready supply of hot and cold processes, so a surpluss of heat is gener- ally available to power multiple wire- less sensor nodes.


Mechanical movement such as vibra- tions can be converted into electrical energy using a variety of transducers. Electromagnetic mechanisms, piezo- electric transducers and electrostatic transducers are all based on a mechani- cal resonator that can only deliver a rea- sonable power output if the resonance frequency of the harvesting device matches the external excitation fre- quency. So the use of energy-efficient variable-speed drives to run pumps and other process equipment, for example, limits the capacity of vibration-harvest- ing systems.


Supply and demand


EH is often discontinuous, with pho- tovoltaic system only gathering energy in daylight or a TEG powering down as the process cools down during plant shutdowns. On the other hand, these systems may sometimes be harvesting more energy than needed. Similarly, the power con- sumption of a wireless sensor may also be discontinuous, depending on the duty cycle and the update rate of the instrument. Peak loads may occur that draw more power than the EH system can deliver. In many cases a buffer will be needed to help match the energy supply and demand. Typical buffers include: special capacitors that can tolerate high peak currents; rechargeable secondary cells or batteries that store excess energy from the EH device when demand is low; conventional batteries that cannot store excess energy but can provide backup power; and typical industry pri- mary cells, with their long shelf life and


Self-sufficient instrumentation, made possible through the use of energy harvesting technology, will allow processors to reap the benefits of wireless communi- cations


low self-discharge rates. Harvesting devices and buffers need an appropri- ate power management system to achieve truly autonomous operation. Energy harvesting is not yet widely used in process instrumentation, but the first generation of successful exam- ples are beginning to emerge. For exam- ple, ABB has developed a completely autonomous wireless temperature transmitter that relies on TEG technol- ogy, which is integrated into the device. The instrument behaves essentially in the same way as a conventional temper- ature transmitter, and the system also includes a buffer for times when the temperature gradient drops below the 30˚C needed to drive the TEG. In this application micro-TEGs are used, which are wafer-based technology. In most cases the process is warmer than the ambient air, so the hot side of the TEG is coupled to the process so as to optimise the heat flow through the device. The cold side is coupled to the ambient air via a heat sink. A tempera- ture difference of 30˚C is enough to power both the measurement and the wireless communication electronics. A bigger gradient delivers even more energy, potentially providing for more frequent update rates, for example. The initial success of the


WirelessHART temperature probe from ABB points the way towards increasing the use of truly autonomous, cost-effec- tive instruments in the future.


ABB T: 0870 600 6122


Enter 234 E: moreinstrumentation@gb.abb.com 27


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36