FABTECH PRODUCTS
Stainless Coolant-Through Roughing Tool RM5 stainless steel roughing geometry features guided twin-channel coolant targeted at the chip, providing maxi- mum cooling and enhanced tool life for machining ISO M stainless steels and ISO S high-temperature alloys. The new RM5 jet guiding geometry di- rects the cool- ant beneath the chip and thereby even closer to the cutting edge. For added cut- ting effi ciency, the Walter
RM5 uses Tiger·tec Silver PVD Al2O3 cutting tool inserts in grades WSM10S, WSM20S, WSM30S, and Tiger·tec Silver CVD cutting tool material in WMP20S grade. The design of the cutting edges reduces notch formation and crater wear. Rigid clamp, wedge- type or lever-type clamping toolholders
are available. Walter USA LLC
Ph: 800-945-5554 Web site:
www.walter-tools.com/us
TO PLACE:
Employment, service, new and used equipment, rebuilding, parts & service, scrap metal, agents, business listings, consultants and general admission.
ENGINEERING
CONTACT: Marcus Abdullah
One SME Drive, PO Box 930 Dearborn, Michigan 48121-0930 Phone: 313 425-3262 Email:
mabdullah@sme.org Email:
advertising@sme.org
RATES:
Line Ad. Per line $35 (minimum 5 lines, 7 words per line avg.) No agency commission.
Display ad per inch: 1x: $195 6x: $180 12x: $165 (maximum 2")
Color available, please inquire. No agency commission. Display Ad Units.
(Same as publications rates) Agency commission allowed to recognized agencies.
Payment in advance on all listings.
D. Free or Nominal Rate Distribution (by Mail and
Outside the Mail)
PRODUCTS/SERVICES
CLASSIFIEDS PRODUCTS/SERVICES
High Peel and Shear Strength Adhesive
EP21TDCHT Epoxy System
ì Toughened and flexibilized ì Resists vibration and mechanical shock
www.masterbond.com Your Ad Here
call Marcus Abdullah at 313-425-3262
OIL MIST & SMOKE IN YOUR SHOP?
Visit
AdvancedManufacturing.org
www.mistcollectors.com Tel: 1-800-645-4174
STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION required by the Act of August 12, 1970; section 3685, Title 39, United States Code.
1. Date of fi ling: September 28, 2016 2. Title of publication: MANUFACTURING ENGINEERING 3. Frequency of issue: Monthly 4. Location of known offi ce of publication: One SME Drive, Dearborn, MI 48128 5. Location of Headquarters or General Business Offi ce of Publisher: One SME Drive, Dearborn, MI 48128 6. Names and addresses of Publisher and Editor are: Publisher: Gregory S. Sheremet, Publisher, SME, One SME Drive, Dearborn, MI 48128 Editor: James D. Sawyer, Editor in Chief, One SME Drive, Dearborn, MI 48128
7. The owner is: SME, One SME Drive, Dearborn, MI 48128 8. The known bondholders, mortgages, and other security holders owning or holding 1% or more of total amount of bonds, mortgages or other securities are: None.
15. Extent and Nature of Circulation
A. TOTAL NO. COPIES PRINTED (net press run) B. PAID OR
REQUESTED CIRCULATION
Avg. No Copies Each Issue
(1) Mailed Outside-County Paid Subscriptions Stated on PS Form 3541 (include paid above normal rate, advertiser’s proof copies, and exchange copies) (2) Mailed In-County Paid Subscriptions Stated on
During Preceding 12 mos. Published Nearest to Filing Date 90,525 86,361
No Copies of Single Issue 90,374
86,638 0
PS Form 3541 (include paid distribution above nominal rate, advertiser’s proof copies, and exchange copies) (3) Paid Distribution Outside the Mails Including Sales
Through Dealers and Carriers, Street Vendors, Counter Sales, and Other Paid Distribution Outside USPS) (4) Paid Distribution by Other Classes of Mail Through the USPS (e.g., First-Class Mail)
C. TOTAL PAID AND/OR REQUESTED CIRCULATION (Sum of 15b (1), (2), (3) and (4)
(1) Free or Nominal Rate Outside-County copies included on PS Form 3541
(2) Free or Nominal Rate In-County copies included on PS Form 3541
(3) Free or Nominal Rate Copies Mailed at Other Classes Through the USPS (e.g., First Class Mail)
E. TOTAL Free or Nominal Rate Distribution (Sum of 15d (1), (2), (3) and (4)) F. TOTAL DISTRIBUTION (sum of 15c and 15e) G. COPIES NOT DISTRIBUTED H. TOTAL (Sum of 15f and g)
I. PERCENT PAID (15C Divided by 15f times 100) 0 0
86,361 0 0 0
1,919
88,280 2,245
90,525 97.8%
16. Total circulation includes electronic copies. Report circulation on PS Form 3526-X worksheet. 17. Publication of Statement of Ownership. If the publication is a general publication, publication of this statement is required. Will be printed in the November 2016 issue of this publication.
18. Signature and Title of Editor, Publisher, Business Manager, or Owner: I certify that the statements made by me above are correct and complete. Gregory S Sheremet, Publisher
November 2016 |
AdvancedManufacturing.org 83 0 0 0
86,638 0 0 0
(4) Free or Nominal Rate Distribution Outside 1,919 1,673 the Mail (Carrier or other means)
1,673
88,311 2,063
90,374 98.1%
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94