FABTECH PRODUCTS
be dynamically extended. HandyPROBE Next is available in Standard and Elite versions. Creaform USA Inc. Ph: 888-979-5220 Web site:
www.creaform3d.com
QC Tool-less Thick Turret Punching Ultra QCT quick-change tool-less thick turret punching system is easy to set up. Designed for faster setups, Ultra QCT features a simple, intuitive tool-less punch retention mechanism. Flip the latch to remove and snap the new insert into place. The punch is keyed at the perimeter of the tool—not the center—providing superior angular- ity control. The shoulder of the punch remains securely guided
by the guide when punching. Only one punch driver is need- ed for rounds or shapes. Ultra QCT design integrates into all existing Mate UltraTEC, Ultra XT and Ultra Fully Guided guides and standard canisters. This interchangeability feature maximizes effi cient tool usage and helps control and reduce tool inventory. Mate Precision Tooling Ph: 800-328-4492 Web site:
www.mate.com
2D, 3D Bevel Laser Cutting
OPENCut for 2D and 3D bevel laser cutting is designed to optimize startup, productivity, and cutting quality in the most demanding production applications. The system offers advanced software and numerical controls that perfectly match the most common CAD systems on the market, allowing complete pro- gramming. The OPENCut system is a complete modular solution customizable according to an OEM’s needs. The system modules are specifi cally designed for the OPEN control OSAI CNC, including the multitouch operator panel, drives and I/O systems controlled via EtherCAT or proprietary
82
AdvancedManufacturing.org | November 2016
Laser Welding Aerospace Alloys Optimized laser welding of nickel-based aerospace alloys is possible using Prima Power Laserdyne’s SmartRamp, which uses S94P laser and motion control. Crack-free welds are produced through use of S94P laser process parameters that take into account the relatively large solidifi cation tem- perature range of nickel-based aerospace alloys. Essential to a successful welding process are thorough cleaning before welding and proper fi xturing for butt and overlap welding of nickel-based plate and sheet. Correct fi xturing is important in controlling thermal expansion during the welding process. Restraint provided by a properly designed fi xture can be used to control stresses in the weld. Prima Power Laserdyne Ph: 763-433-3700 Web site:
www.primapower.com
fi eldbuses. The OPENCut, HMI and CAM software with 2D and 3D graphics for profi le defi nition, has pre-defi ned icon libraries and automatic nesting of different profi les. OSAI USA
Ph: 413-598-5200 Web site:
www.osaicnc.com
Zero Point Clamping System DockLock zero point clamping system instantly aligns and locks vises and fi xtures quickly and accurately for small-to- large part setup on all types of horizontal and vertical ma- chining centers. Vises and fi xtures mount quickly and easily to the DockLock, allowing users to instantly locate or remove the workholding from a machine, or move it offl ine or to another machine and/or back again in just seconds with zero-point accuracy every time. Repeatable mount- ing accuracy is ±0.0002" (0.005 mm) on a typi- cal part setup, ensuring high-quality fi nishes, no scrap parts and substantial setup time reduction. A typical workholding setup change requiring 20 minutes using standard methods is done in less than two minutes with DockLock. Kurt Manufacturing Co. Ph: 877-226-7823 Web site:
www.kurtworkholding.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94