Pelletier plate to the assem- bly, making nitrogen gas cooling un- necessary. A
new collimator enables fast adjustment for cutting materials of different thicknesses. Salvagnini America Inc. Ph: 513-874-8284 Web site:
Salvagnini.com
Bending System
The HG 2204 ATC bending solution is engineered to be well suited for variable lot sizes and complex tool
layouts. A patented Automatic Tool Changer (ATC) loads the most complex tool layout within a few minutes and allows operators of varied experience levels to effi ciently utilize this bending system. The HG press brake’s 13' (4-m) bed length facilitates multistage bending operations and supports bend lengths up to 161.4" (4100 mm). Amada America Inc. Ph: 877-262-3287 Web site:
www.amada.com/america
Affordable Metalcutting
The new Plate-Fab cutting machine gives smaller fabricators more precision and production options at a lower cost. Plate- Fab can be confi gured with one plasma cutting torch and/ or one oxy-fuel torch. Plasma options include the latest tech- nology such as True Hole, Rapid Part and SureCut by Hypertherm.
Plate-Fab includes a unitized, double-walled downdraft table that isolates sparks and fumes while providing insulation that reduces heat transfer from the torch to the machine. The downdraft table also has easy-to-remove clean-out pans that reduce the time needed for cleaning. The optional unitized water table for Plate-Fab reduces smoke, sparks and dust
and allows the operator to set the correct water level using pneumatics. Removable pans reduce clean-out time. Koike Aronson Ph: 800-252-5232 Web site:
www.koike.com
Machine Monitoring Software MachineMetrics offers software designed for solving specifi c problems present in modern manufacturing including poor data and visibility into production, production delays, and dif- fi culty achieving high effi ciency and OEE (Over- all Equipment Effectiveness). Early adopters have reported a 20% increase in productivity
LIFTING
• Flat lift ratings of 220 to 4,400 lbs.
HOLDING
• Grade 42 neodymium assemblies
CLEAN UP
• Push, hang & trailer-type sweepers
Booth C20046
November 2016 |
AdvancedManufacturing.org 75
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94