BPT drives cost savings with new


LED Lights New from Birchwood Price Tools is the Defender DC4000 and DL4000 range of robust, low energy, LED lights that deliver maximum output. Migrating away from fluorescent tubes is a time saver especially since they


drive significant breakages and down time on a job. This along with an increased demand in energy efficient lighting means these new LED lights support user needs on site. The range consists of: the DL4000 -an LED linkable 2 ft. task light and the


DC4000 -an LED contractor floor light. Both effortlessly deliver 4000 Lumens lighting output using over 100


Samsung LEDs. In addition the frosted lens offers glare reductions in use. Both operate on a standard 110V power supply ideal for site use. The lights are cost effective to run: with their low power consumption 42W;


a 4kVA power supply will easily power 50 units. Fundamentally, fewer DL/DC4000s are required to light up the same sized space versus a fluorescent alternative, offering valuable cost savings. The units are lightweight but durable, built to withstand the harshness of


onsite use. The end caps are over moulded for added protection and the units are vented for ultimate heat control. Additionally the lights are versatile. The DC4000 features a sturdy steel tripod leg offering a floor light solution, however


can be removed easily using the Hex key supplied. This allows both lights to be suspended from ceilings or attached to scaffolding and masts. The Defender DC4000/ DL4000 LED Light range is available to buy now. E- sales@birchwoodpricetools.com. W- birchwoodpricetools.com. T- 0115 938 9000


New from Stahlwille – The MANOSKOP 730 Fix –


It’s an adjustable wrench that you can “Fix” For customers in industrial production environments, the use of ‘pre-set’ or ‘production’ torque wrenches has been the natural choice for many years. If the operator is repeating the same operation over and over on a production line, it is important to ensure that they cannot change the torque setting of the wrench, thus ensuring the product is manufactured to specification. However, the customer often has to invest in an increasing number of ‘pre-set’ wrenches, preset at different torque


settings for different applications. Alternatively, workshop torque testers are used to adjust the torque setting of the wrench for different tasks, or it is returned to the calibration lab for a torque setting change. This has been a bug-bear for many operators for some time. The new MANOSKOP 730 Fix addresses this head on: The 730 Fix is adjustable, with a scale, and is calibrated throughout the range.


The target torque can be set very quickly and easily using the QuickSelect knob.


The QuickSelect knob can then be unscrewed and removed by hand within seconds, without the use of any tools.


The TORX® TAMPER-RESISTANT screw (included) can be installed using the screwdriver bit (also included) and a bit driver.


Finally, as an extra measure, the self-adhesive cover (included) can be applied to cover the blanking screw. For further information, visit stahlwille.co.uk.


telephone 01444 440188 ToolBUSINESS+HIRE 3


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32