Wire/Electrical Supplies


Cutting edge innovation When it comes to wiring accessories, wire cutters are a key tool in any electrician’s tool bag. Selecting wire cutters that are designed for the job, efficient and comfortable to use is more important than many electricians realise. Charles Alan Whitfield, New Product Development Manager at C.K tools, discusses the importance of having the right tools for the job. Cutting through wire


is, for electricians, one of the most repeated jobs during a workday and what may seem like a straightforward task, actually requires the use of 42 hand muscles. It’s no surprise therefore that trigger finger - or stenosing tenosynovitis - is becoming an increasing problem for tradesmen as a result of repetitive strain on the hands and fingers from repeated gripping actions and using tools that regularly press on the palm – standard daily tasks for an electrician. This painful and


sometimes debilitating condition is caused from tendons swelling, which interferes with the normal movement of the tendons and can cause the finger to click, catch (“triggering”) and lock in position. Consider the severe cramp in the hands you often experience after a long day


on site, intensified by working in confined spaces with limited access for tools, let alone hands. The cramp is about bearable but over time trigger finger can easily develop and worse case scenario, could leave a tradesman incapacitated for weeks, impacting negatively on profits. For that reason, preventative action is extremely important and ensuring you


are equipped with tools designed specifically for the task at hand is the first step. Historically, side cutters were manufactured with a one size fits all approach, manufactured with an obtuse cutting angle to provide the strength needed for cutting through high tensile steel wire used in the construction industry. Until now, there has been a distinct lack of choice for side cutters that are specifically designed for the effortless cutting of wires electricians deal with, day in, day out. Identifying a gap in the market, C.K tools enlisted independent metallurgists


and engineers to make C.K Side Cutters the best an electrician can buy. This involved using the finest German steel, induction hardened in a closely controlled process using specially formulated quenching technology to deliver the ultimate durability. Through an exhaustive testing program, C.K tools redefined the cutting


geometry of its side cutters to define the optimum blade angles for the effortless cutting of copper and aluminium cables; an industry first. The result is impressive, with independent, controlled testing proving that this


fusion of engineering expertise has a marked impact on the ease of cut and blade durability. Thanks to these developments, the C.K Redline VDE Side Cutters require up to 18 per cent less force than other leading brands, making them the best on the market. To put this in context, the average pressure saving to make a cut is 74 Newton


meters with an average electrician making over 10,000 cuts per year – resulting in a personal saving of over 75 tons of pressure! The new, groundbreaking features of C.K’s Side Cutters enable electricians to


finish a job quicker and easier to high, professional standards. Ensuring maximum comfort in use, ergonomically designed high grip handles, which, combined with leading cutting performance, prevent health issues such as trigger finger that can come with using lower quality tools. With safety at the fore, C.K Redline VDE Side Cutters benefit from VDE


certification, individually tested to 10,000V, providing professional electricians with total peace of mind and safety when dealing with electricity. Superior quality is the key to a good tool and in turn, healthy hands. Investing


in quality tools, fit for purpose, ensures a quality job done, time saved, money earned and a fit bill of health. For more information visit www.carlkammerling.com


14 ToolBUSINESS+HIRE www.toolbusiness.co.uk Putting Innovation to the test


with C.K Magma Carl Kammerling International has enhanced its C.K Magma range of premium tool storage with the new Magma Test Equipment Case - an industry first, allowing electricians to carry diagnostic testing equipment and a selection of essential tools in one handy case. After conducting extensive research into how electricians store and transport


test equipment, CKI noticed this gap in the market, developing the Magma Test Equipment Case as a convenient solution to the problem. The new product features a made-to- measure storage for both a test meter and toolkit, removing the inconvenience of having to transport them separately. The case, with an RRP


of £59.57, also offers a more lightweight alternative to carrying equipment compared to the heavier plastic cases often provided by the equipment manufacturers. Featuring rubber feet and adjustable padded compartments, the C.K Magma


Test Equipment Case provides durable, safe storage for testing equipment, plus a separate top compartment for storing a range of tools and accessories, as well as 27 easily accessible pockets, including a handy business card and documentation holder. Charles Whitfield, Product Development Manager at C.K Magma commented:


“Feedback revealed a need for a single solution to transport a diagnostic testing kit and a small selection of essential tools, without having to carry their full toolkit. The new Magma Test Equipment Case is a direct result of this process and has been well received by electricians.” For further information please visit www.carlkammerling.com or call


01758 704704. C.K tools RedLine VDE High


Leverage Side Cutters Always a cut above the rest, Carl Kammerling International has reconfigured and improved its popular C.K tools RedLine VDE High Leverage Side Cutters, making them safer and easier than ever to cut through electrical cables. The cutters’ new slimmer profile offers easier access in tight spaces, while the


special high leverage design maximises the transmission of force from handle to cutting jaws thereby taking the strain out of cutting through thick cables up to 6mm in diameter. Available in 180mm (RRP £31.45) and 200mm (RRP £34.84), the C.K High


Leverage Side Cutters feature induction hardened alloy steel jaws for exceptional strength and outstanding long-term performance, while two component ergonomic design anti-slip horns provide increased comfort, control and safety. The new and improved High Leverage Side Cutters are part of a wider range


of C.K Redline VDE products, which are amongst the safest pliers and cutters on the market. Charles Whitfield, New Product Development Manager for Carl Kammerling


International, commented: “Improving the performance and efficiency of our products is always a priority for Carl Kammerling. That’s why we enlisted an independent metallurgist to find not only the most durable metal to cut copper and aluminium, but also to establish the optimum geometry to provide easier cutting of wires. “The result is our new High Leverage Side Cutters reduce the strain of cutting


through thick cables thanks to the improved power and capability of the cutting jaw, significantly reducing the amount of force required by tradesmen.” For further information please


visit www.carlkammerling.com or call 01758 704704.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32