Advertorials Gateway adds Ferroxcube


Gateway continues to strengthen its specialist ferrite and EMC positioning with its appointment by Ferroxcube, world leader in ferrite-ceramic technology, offering a broad range of soft ferrite cores, accessories and EMI suppression products.


Martin Ford, Managing Director of Gateway commented “Ferroxcube strengthens our appeal to those customers seeking access to most of the serious ferrite brands from one source. We have built a valued reputation in the ferrite sector with the help of TDK and Fair-Rite, and we see our appointment by Ferroxcube as the most obvious and natural step in enabling our expanding customer base with the resource they need to increase stock availability and reduce their vendor base.”


The addition of Ferroxcube, the launch of the dedicated ferrite and magnetics website, alongside a programme to provide core gapping and machining services purposefully strengthens Gateway’s specialist position in one of it’s chosen arenas.


Gateway Electronic Components Tel: 01270 615999 www.theferritegateway.com


Especially for the cable equipment of prototypes and small batch series, SAB Bröckskes, the specialist in


cable production offers highest support Connection cables for the visible areas of devices are a special challenge for the prototype and small series production. Individual requirements regarding numbers of cores, outer diameter, sheath colour and grip shall be fulfilled. Nevertheless, for such small quantities only huge lengths are available. Also the especially designed colour of the device is rarely to be found with stored cables .


Remedy of single parameters often lead to high remainders which generally can t be used any more.


Especially in this range a unique support is offered:


Specialised on customised solutions and process approach, the cable specialist SAB Bröckskes offers the production of special cables already for a quantity of 100 m considering the customer s requirements at the same time.


Unique highlights: • also these small quantities are made in series production


• a wide range of bio compatible materials of the SABmed line which are (cytotoxicity acc. to EN ISO 10993-5) the corresponding certificates are available


• individually chosen. For the biological harmlessness acc. to EN ISO 10993-1 • the outer sheath colour can be adapted to the design of the device and offers • a harmonious visual appearance • highest flexibility, noble grip and no risk of kink, the typical torsion effect of • handheld connection cables


• on request also available as cable harness


SAB Bröckskes Gmbh www.sab-cable.com


OKW’s stylish new universal feet kits for enclosures


OKW’s new round universal case feet can be specified with or without tilt legs OKW has added new round universal case feet to its wide range of accessories for electronic enclosures.


These stylish and modern feet can be specified with or without tilt legs, making them perfect for laboratory equipment or other desktop instrument enclosures which require a choice of viewing angles.


They can be fitted to any type of plastic or metal enclosure with a wall thickness of up to 3 mm with the standard screws supplied. Longer screws can be supplied for larger wall thicknesses on demand.


The feet are easy to install, requiring just three holes in the enclosure panel. OKW supplies drilling details with each kit.


Two standard kits are available, each with four feet. Kit 1 includes four foot bodies, push-in anti-skid pads and self-tapping screws. Kit 2 also includes two tilt legs with 120º rotation.


Each foot is sized ø30 x 12 mm high. The foot bodies are moulded in ABS (UL 94 HB) while the anti-skid pads are soft touch TPE for maximum grip. Four standard colours are offered: anthracite grey (RAL 7016), light grey (RAL 7035), off white (RAL 9002) and black (RAL 9005).


OKW’s new feet are available in a range of eight kits: • A9257404, feet kit in anthracite grey • A9257504, feet kit with tilt legs in anthracite grey • A9257405, feet kit in light grey • A9257505, feet kit with tilt legs in light grey • A9257407, feet kit in off white • A9257507, feet kit with tilt legs in off white • A9257409, feet kit in black


• A9257509, feet kit with tilt legs in black. OKW offers free samples for evaluation.


Prices for the new round feet kits start at £7. OKW expects the range to be extremely popular, based on the success of its existing CASE FEET which are also available with or without tilt legs.


For more information on this product, visit the OKW website here: https://www.okw.co.uk/en/Plastic-enclosures/Tilt-foot-bar-tilt-feet.htm


Low-cost AC inrush current limiter


Powersolve's ESB-101 is a low-cost peak inrush current limiter designed for capacitive loads in a variety of applications across automation systems and machinery. The ESB-101 is available in either 115VAC or 230VAC versions and limits power-up currents and provides continuous operation up to 16A.


According to Powersolve’s Managing Director Peter Clark, it is designed to provide high reliability and maintenance-free operation. “Very nasty conditions can occur on AC lines in the event of a break in the supply” Says Peter Clark. “When power returns, high current peaks can often cause havoc and will trip circuit breakers. In decentralised areas, this will often lead to increased maintenance costs as the breakers require re-setting. This current limiter prevents this happening.” He adds.


Not to be confused with a simple NTC (thermistor) solution, the ESB-101 is a true current limiter and cuts off all peak currents when starting loads under practically every AC condition. It is fitted with an internal temperature fuse to prevent overheating should the bypass circuit fail.


The ESB- 101 has an inrush limiting time as low as 300ms, a capacitance range of 1500µF to 4000µF and an operating temperature range of -40 to +70ºC, it can be wall or DIN Rail mounted, accepts 26 to 10 AWG wire with screw terminals and is housed in an IP20 rated housing.


The limiter is designed to be integrated into capacitive loads such as AC-DC power supplies running in parallel operation. When started, these can cause peak currents in the region of several hundred amps which will trip breakers or disrupt network installations. The ESB-101 is a cost-effective way to prevent this. Many other models available with higher current ratings.


Powersolve powersolve.co.uk Oxley Launches NVIS Compatible Rear Mount


LED indicator STR502 Oxley is delighted to announce the launch of a new NVIS compatible rear mount LED indicator. The STR502 lamp has been designed to meet a growing customer demand for high specification rear mounted panel lamps with special features.


The 8mm lamps meet IP68 sealing and are available as a bi-colour option (2STR502), a sunlight viewable solution and an NVG option is available. The lamp has been designed with a configuration option to meet MIL-STD-3009


Lighting Aircraft, Interior Night Vision Imaging System (NVIS) Compatible*. The lamps are suitable for the most challenging of environments including military, aerospace and telecommunications.


Oxley STR502


The lamps are made with a small and compact case design in aluminium with a black nickel or chromate finish and come in a range of eight standard & high intensity colours and eight NVG colours. As with all of the Oxley lamps, these high performance products are available in a wide variety of configurations to suit the required application.


For more information on this and on the full Oxley range please visit www.oxleygroup.com


Nidec Servo introduces new range of low noise,


high performance axial DC-fans Market trends for equipment where cooling is required, are constantly becoming higher-density and miniaturised in design. Such equipment requires quality fans with high static pressure capabilities which are optimised to raise the cooling efficiency. For high static pressure applications, diagonal flow fans, (which exhaust in a centrifugal direction) or solutions where 2 axial fans are mounted in series are usually considered, however disadvantages may occur due to the direction of airflow, physical size and cost.


With a new range of models, Nidec servo (distributed by Dynetics GmbH) managed to get more static pressure and more airflow without compromising in size and noise level.


These cUL/TUV approved high performance ball-bearing fans are very suitable for use in the Industrial and IT market.


Dynetics published an article “New design method resulted in a unique generation of axial high static pressure fans” also please visit http://www.dynetics.eu/ for all specifications.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48