FEATURE HMIS, PLCS & INDUSTRIAL PCS
With so many choices and configurations
available, how should you go about selecting the correct controller for your application? Mitsubishi Electric
product manager Hugh Tasker offers his five golden rules for PLC specification
F
rom modular PLCs that evolved from the room-filling computer racks of
old, to micro PLCs that now occupy the same space as original relay replacement bricks, there is much for the system designer to ponder when it comes to specifying a PLC system. Add to the equation such alternatives as C-based controllers or a combined PLC/HMI, and the choice is wide ranging. Get it wrong, however, and you could end up either with a system that is under-specified – compromising system performance in the short term and needing a costly upgrade in the longer term – or over-specified and ending up with unused features and more cost than the project justified. By bearing in mind five golden rules for PLC specification, it is possible to ensure that the controller selected meets the exact requirements of the application.
RULE 1 – SYSTEM SIZE The start point in specifying any controller is to assess the I/O requirements. So-called micro PLCs can offer astonishing performance in lower I/O count systems but hardware, memory or other constraints mean that 300 I/O really does represent the upper limit of their capability. At the other extreme, large modular PLCs are capable of handling tens of thousands of I/O. The compact modular PLC sits between
these. This is a recent development that offers combinations of I/O counts and function sets that can be tailored to the application. Combining familiar programming with numerous advanced options, they will provide the ideal solution for many mid-range applications.
RULE 2 – FUNCTIONALITY AND FLEXIBILITY Hardware cost has given way to programming time as the most significant cost in system development. The ability to develop highly functional systems in the minimum amount of
14 SEPTEMBER 2016 | DESIGN SOLUTIONS
THE GOLDEN RULES of PLC specification
time demands a high level of flexibility within both the hardware and the software. Using a PLC that is very fast to program can justify buying a quality brand even when price is crucial. System designers are well advised to
look for combinations where they can move seamlessly between different programming languages – either within a single project, or from one project to the next – and where the programming tools will allow them to design and pre-commission a project before going to site, saving costly commissioning time. Furthermore, the best PLC programming tools also include powerful pre-written function blocks, further saving significant development time.
RULE 3 – PERFORMANCE The next question to address is the performance capability of the PLC in relation to the application. A packaging machine, for example, will almost always require a high-speed processor, frequently with motion control and connectivity options. However, don’t dismiss the performance requirements of something like a temperature control process – this may require the ability to control or monitor numerous analogue I/O and perhaps have maths and PID control as part of its instruction set. The best modern PLCs can work at sub-nano second speed per instruction, calling into question the need for PC-based controllers which would previously have been regarded as the benchmark for high-speed applications.
RULE 4 – CONNECTIVITY Historically, many PLC systems were set up as standalone systems and this may
From modular PLCs to micro PLCs there is much for the designer to ponder when it comes to specifying a system
still be appropriate, perhaps for reasons of cost or security. Now, even the smallest systems can benefit from improved connectivity. Remote access can ease maintenance and provide monitoring flexibility, while the ability to gather data from the system can help users to maximise efficiencies and reduce downtime. It is prudent, then, to properly assess connectivity requirements. Even compact PLCs today can
deliver maximum flexibility by offering connectivity to the widest number of network protocols – both open and proprietary.
RULE 5 – SECURITY Cyber security has become one of today’s key concerns. Connecting PLC systems to the web is an important feature for monitoring or even control purposes but exposes these systems to potential cyber attack. At the same time, there has been a notable rise in instances of PLC code – intellectual property – being cloned for unauthorised reuse. So, question your PLC suppliers on
how robust their security is, both within the programming tools and within the PLC itself.
AVOIDING PITFALLS Following these five golden rules, system designers will be able to avoid the major pitfalls in configuring PLC systems, enabling them to specify controllers that will meet all of the application requirements, perhaps with room for ongoing evolution but without the costs of over-specification.
Mitsubishi Electric
gb.mitsubishielectric.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
