Details of licensed marine activities 2.—(1) This licence authorises the undertaker (and any agent or contractor acting on their
behalf) to carry out the following licensable marine activities under section 66(1) of the 2009 Act, subject to the conditions—
(a) the deposit at sea of the substances and articles specified in sub-paragraph (3); (b) the construction of works in or over the sea and/or on or under the sea bed;
(c) the removal of sediment samples for the purposes of informing environmental monitoring under this licence during pre-construction, construction and operation.
(2) Such activities are authorised in relation to the construction, maintenance and operation of—
Work No. 2 – up to two HVDC offshore converter stations fixed to the seabed within the area shown on the works plan by one of two foundation types (namely jacket foundation or gravity base foundation);
Work No. 3A – up to four HVDC export cables between Work No. 2 and MHWS consisting of subsea cables along routes within the Order limits seaward of MHWS including one or more cable crossings.
(3) And in connection with such Works No. 2 and 3A, ancillary works within the Order limits
which have been subject to an environmental impact assessment recorded in the environmental statement comprising—
(a) temporary landing places, moorings or other means of accommodating vessels in the construction and/or maintenance of the authorised scheme;
(b) buoys, beacons, fenders and other navigational warning or ship impact protection works;
(c) temporary works for the benefit or protection of land or structures affected by the authorised scheme; and
(d) the disposal of up to 245,000 metres3 of inert material of natural origin within the offshore Order limits produced during construction drilling and seabed preparation for foundation works and cable sandwave preparation works at disposal site reference TH23 East Anglia ONE.
(4) The substances or articles authorised for deposit at sea are— (a) iron/steel; (b) stone and rock; (c) concrete; (d) sand and gravel; (e) plastic/synthetic;
(f) material extracted from within the offshore Order limits during construction drilling and seabed preparation for foundation works and cable sandwave preparation works; and
(g) marine coatings, other chemicals and timber.
3. The grid coordinates for the authorised scheme are specified below and more particularly shown on the Order limits boundary coordinates plan—
Coordinates for the Order limits seaward of MHWS Point
1 2 3 4 5 6 7
Latitude (DMS) 52° 0 0.777 52° 0 41.137 52° 3 53.611 52° 5 44.773 52° 8 21.995 52° 9 37.650 52° 9 40.842
117
Longitude (DMS) 1° 25 27.320 1° 27 15.227 1° 35 40.499 1° 40 57.350 1° 48 34.767 1° 53 5.293 1° 57 7.198
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131