WORKING AT HEIGHT
Falls, slips and trips account for more than a third of all UK workplace injuries, with fork lift truck drivers and warehouse staff ranking highly among them. Here are the facts, along with essential advice for supervisors, drivers and all employees who work alongside fork lift trucks from the Fork Lift Truck Association.
A large number of employees who work with, and alongside, fork lift trucks believe the vehicle’s low profile makes them immune from falls, slips and trips – but they’re wrong.
Every year, falls from stationary and moving fork lift trucks seriously injure approximately 40 workers in the UK, including operators and surrounding warehouse staff.
A recent three-year HSE investigation into the food and drink industry analysed 150 falls from height. The results showed that ladders and fork lift trucks/vehicles were the top two causes, accounting for 40% and 17% of all serious fall injuries respectively.
THE ‘THREE-POINT HOLD’ RULE Advice from authorities like the HSE and the FLTA on how to avoid falls and safely mount or dismount from a fork lift truck generally focuses on the so-called ‘three-point hold’ rule.
Peter Harvey, FLTA Chief Executive, explains: “When getting on or off a fork lift truck, you should always maintain three points of contact with the machine at all times. This means one hand and two feet, or two hands and one foot.
“Three-point contact forms a triangle of anchor points which changes in form as you move. Your weight should be evenly distributed among the three contact points and you’re more stable when the centre of this triangle is close to your centre of gravity.”
NON-INTEGRATED WORKING PLATFORMS Fork lift trucks are designed primarily for lifting materials, but in special circumstances they may be used with a purpose-built platform, allowing for safe working at heights.
Peter Harvey explains: “The law forbids the use of pallets or any improvised device, but under certain circumstances a purpose-built, non-integrated working platform that has been specially designed by a manufacturer of specialist attachments can be legally used.
“It’s also important to know that the law is very restrictive here and specifically outlaws the use of this kind of working platform for regular, repetitive or routine tasks.”
HSE Guidance Note PM 28 (4th edition), Working Platforms (Non-Integrated) On Forklift Trucks offers guidance on selecting, use and design of working platforms and outlines relevant legislation.
Readers can also refer to the FLTA’s Fact Sheets section of the Association’s website in the ‘Best Practice Advice’ section.
This is one of the most visited areas of the FLTA website and the recently updated Fact Sheet 18 covers the use of working platforms on fork lift trucks.
Importantly, any fork lift truck that may be used with a working platform must undergo a thorough examination at least once every six months. In addition, all working
www.tomorrowshs.com
platforms must also undergo thorough examination at least once every six months.
EVACUATION PROCEDURES The law requires employers to provide a safe means of escape for operators working with these types of mechanical handling equipment, should it become stuck in a raised position.
LOLER 98 (Lifting Operations and Lifting Equipment Regulations 1998) states that: “You should ensure that in the event of failure of the lifting equipment that the persons being lifted are not exposed to danger and a reliable means of rescue is available.”
Every site and application is different, so a risk assessment designed to meet the operation’s needs must be conducted to determine the most appropriate means of safe escape.
The FLTA’s Fact Sheet 14 also helps explain the law here and offers important advice and guidance on rope evacuation.
Many more fact sheets are available on the FLTA website entirely free of charge, so if you are ever in doubt simply visit
www.fork-truck.org.uk and navigate to the popular Fact Sheets section in ‘Best Practice Advice’.
BE A SAFE USER If you are committed to improving safety it’s worth considering membership of the FLTA Safe User Group.
Developed especially for fork truck users, it provides access to the Safer Site Programme, legislation guidelines, advice on regulations, specialist publications, health and safety updates, Technical Bulletins, safety alerts, an independent and confidential telephone helpline, and much more.
When entering or leaving a vehicle, fork lift truck operators should:
• Always face in towards the machine.
• Mount and dismount only when the equipment is stationary,
• Only break three-point contact when you reach the ground or cab.
• Avoid sideways movement as it puts you off balance.
• Take extra care in wet, snowy or icy weather.
• Never jump as you may land off balance or on an uneven surface.
www.fork-truck.org.uk 25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50