OUT OF THIS WORLD A recent vinyl installation proves an astronomical success at Chelsea hospital thanks to F. Ball.
High-performance subfloor preparation products from F. Ball and Co. Ltd. have been used in the refurbishment of the flooring in the Jupiter ward at Chelsea & Westminster hospital in west London. Contractors from Biswell Flooring, sub-contracted by Ensigna Construction, used Stopgap P131 general-purpose primer, Stopgap 1200 Pro smoothing underlayment and Styccobond F46 pressure sensitive adhesive to install a new floor in the 1000m2
ward and adjoining wet rooms.
The Jupiter ward, home to the hospital’s adolescent unit, was undergoing a complete refurbishment, updating décor in the wards to create a brighter atmosphere.
After removing the existing linoleum floorcoverings, contractors from Biswell Flooring then removed any loose material from the sand/cement subfloor until only well bonded adhesive residue remained.
The subfloor was primed with Stopgap P131 general-purpose primer, prior to the application of Stopgap 1200 Pro
twitter.com/TContractFloors
smoothing underlayment. Stopgap P131 is used to promote the adhesion of the underlayment to absorbent and non-absorbent surfaces, and helps to prevent the rapid drying of adhesives and smoothing underlayments.
“We have been using F. Ball products for
ward, which included the main
many years, so we were confident that, once
the products had been selected, they would perform well on the
project and within the timescale provided.”
Stopgap 1200 Pro is a fast-setting, minimal preparation two-component smoothing underlayment, designed for use over a wide range of subfloor types. It is suitable for use over old adhesive residue, including bitumen and carpet tile tackifiers, without the need for
priming, and can also be used in clinical and biologically sensitive areas such as hospitals, making it the obvious choice for this installation.
In as little as four hours, Stopgap 1200 Pro is ready to receive floorcoverings, so contractors were able to return a short time later to install a selection of Polyflor floorcoverings in the ward. Using Styccobond F46, a solvent-free pressure sensitive acrylic adhesive, contractors installed Polyflor Mystique flooring in the main area of the ward, and Polyflor Polysafe Standard PUR flooring in the wet rooms.
Paul Holloway, Senior Contracts Manager at Biswell Flooring, said: “The technical support from my F. Ball representative really came in handy in this job, as I was able to get a second opinion on the products most suitable for this particular job and environment. We have been using F. Ball products for many years, so we were confident that, once the products had been selected, they would perform well on the project and within the timescale provided.”
www.f-ball.co.uk PUBLIC SECTOR | 27
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56