Toby Howard-Willis of JG Speedfit explores some of the key considerations surrounding smart heating controls and how they vary between retrofit and new build projects.

s Government and the wider house- building industry work towards greater energy efficiency in housing, there has been a growing demand for prop- erties which make use of underfloor heat- ing and other intelligent heating products. That being said, the availability of retrofit- compatible products means there is still significant scope for developers to improve the energy efficiency of existing properties and, therefore, their desirability within the market.


An understanding of the key considera- tions surrounding smart heating controls in retrofit and new build projects can ensure that the most appropriate solutions are specified, thus maximising the overall value of the project and return on investment. With rapidly evolving legislation and technology, the process for specification can be complicated. The key is to pinpoint the optimal solutions to meet the unique de- mands of retrofit and new build projects, and to understand how to overcome them.

THE DEMAND FOR HEATING CONTROLS When discussing heating controls, the dif- ferences between retrofit and new build projects are significant. While the majority of the growth of the heating controls mar- ket is driven by increased demand for en- ergy efficient new builds, an important share of smart heating demand is still ex- pected to come from the retrofit market. This development has been attributed to a growing tendency in times of economic un- certainty to renovate rather than buying a new property, the hope being that investing in the property will deliver financial re- wards further down the line.

At the heart of this discussion is the drive towards greater transparency around energy consumption and energy efficiency, two topics which continue to fuel demand for smart controls. Smart controls are consis- tently making strides in functionality, af- fording end-users total control over a whole manner of heating applications, from un- derfloor heating to radiators, at the click of a button. The good news is that there is a range of solutions on the market which en- able property developers to pass on cost savings and provide greater control over


energy consumption to homebuyers. UNDERFLOOR HEATING

Where new build and retrofit projects largely differ is in the floor construction, and the extent to which this will impact on the installation process. For any building more than twenty-years-old, this will most likely feature a joist made from solid timber, requiring the use of spreader plates. At 1mm thickness, these lie under the fin- ished floor, be it floorboards or an alterna- tive. In a retrofit scenario an installer would lift up the existing finished floor, exposing the joist below, before installing the spreader plates on top of the joists, running in the same direction. The floor would then be laid back on top. Conversely, an overfit system has a pre-grooved insulation board of 25mm in thickness. Suitable for use in both new build and retrofit applications, an overfit system is designed to be installed on top of a finished floor. This is only possible, however, if the design of the room can sup- port a small addition to the floor height. As- suming the additional floor height isn't a problem, it eliminates the need for in- stallers to carry out additional work on the

existing floor, shortening the installation time significantly.

In addition to satisfying the legal requirements around sustainability, energy efficient properties are more desirable as the energy-related running costs are in- evitably lower. From a housebuilding per- spective, such houses are significantly eas- ier to sell. Underfloor heating eliminates the need for radiators, giving the home- owner and designer greater flexibility around how space is used. Furthermore, spaces can be more easily customised as required.

LEGISLATION FOR NEW BUILD As mentioned previously, new build proper- ties are subject to increasingly stringent legislation around energy efficiency. For ex- ample, developers now need to be aware of the requirement for zonal controls in spaces exceeding 150m².

The smart control market is growing rap- idly and the ability to offer added-value so- lutions can provide a real source of compet- itive advantage and improve overall profitability for developers.

Whether working on a retrofit or new build project, it may seem that the two re- quire different levels of heating controls or underfloor heating systems. However, while the installation may be different, the end result doesn’t have to be. With technical ad- vice available from a leading manufacturer’s support team, developers can help mod- ernise Victorian homes and ensure that new builds are as efficient as possible, meaning the end result of both a retrofit project and new build can yield similar energy savings.

Toby Howard-Willis is technical sales manager at JG Speedfit

Enq. 171

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60