WELDING Ground breaking weld purge monitor A
unique Weld Purge Monitor® has been designed and developed that reads
from atmospheric level of oxygen (20.94%), down to one part per million (0.0001%), breaking all technological boundaries in one instrument. Huntingdon Fusion Techniques Limited HFT® continues to grow its innovation of Weld Purge Monitors® / oxygen analysers that were first invented and manufactured by the company over 40 years ago. CEO for HFT®, Georgia Gascoyne said: “The PurgEye® 600 incorporates the features and benefits of all the other Weld Purge Monitor® designs in the HFT® Family Range, but for the first time, this one instrument has a full range of measurement reading from atmospheric concentration (20.94%), down to 1 ppm, accurate to 10 ppm. Readings are indicated
About HFT
Huntingdon Fusion Techniques HFT® are Weld Purging Innovators, Designers and Manufacturers with offices located globally.
Huntingdon Fusion Techniques HFT® invented the ‘Weld Purge Monitor®’ in 1975 and own all international intellectual property rights and registered trademarks. Weld purging is the act of removing, from the vicinity of the joint, oxygen, water vapour and any other gases or vapours that might be harmful to a welding joint. Such gases may combine with the metal to form undesirable compounds that may reduce corrosion resistance or may be instrumental in creating cracks or other structural defects in metals.
www.internationalmetaltube.com
either as parts per million or in percentage.” Using ground breaking
technology, the PurgEye® 600 has a life time sensor that won’t need replacing or recalibrating. This high level, advanced instrument has been designed with a large, full colour touch screen (3.2”/ 81 mm) and on-screen graph displaying the oxygen levels during the welding process. USB data logging capability allows the operator the ease of
data transfer without the need for a computer connection. These stable, accurate results can be logged for each weld, using the PurgeLog™ Software. Not only has HFT® been able to
achieve these features, they have also included an internal sampling pump with gas filtration, which means there is no requirement for an external hand pump. Quick fit / disconnect, leak
tight fittings are manufactured as standard on the PurgEye® 600. In
addition, control alarms will activate in the event of rising or falling oxygen level, which can be pre-set by the user. The PurgEye® 600 Weld
Purge Monitor® is ideal for industries such as aerospace, pharmaceutical, semi-conductor, cryogenics, specialist gas manufacture and food and beverage, as well as many others where oxide free, zero colour welds have to be achieved and where traceability is a major advantage for the requirements of high-end Quality Control systems. Huntingdon Fusion Techniques
HFT® have a Worldwide Exclusive Distributor network, which can be found at
www.huntingdonfusion. com.
PurgEye® 600 YouTube video:
https://youtu.be/pLJ0Q3KQYCM.
For further information, please contact:
Michaela Reay, Marketing Associate
Huntingdon Fusion Techniques HFT® +44 7880 794 031 (mobile) Press: michaelareay@
huntingdonfusion.com
Sales:
hft@huntingdonfusion.com www.huntingdonfusion.com
IMT June 2016 33
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36