WELDING We have the key to your perfect weld
help obtain non-oxidised, zero colour welds by monitoring the oxygen leve¬ls when welding metals such as titanium, stainless, duplex and chrome steels as well as zirconium and nickel alloys where a high quality weld is required. The Weld Purge Monitor® was
W
invented by HFT® in the 1970’s and with over 40 years of innovation, design and manufacturing experience, the company now has a Family Range of PurgEye® Weld Purge Monitors® to measure oxygen levels from atmospheric content (20.94%) down to 10 ppm (0.001%) at which point no discolouration in welds should occur.
By striving for zero colour welds, companies can eliminate the post- weld cleaning costs, which can be very high and in those cases making the cost of each weld ultra significant. The Argweld® PurgEye® Family
Range of Weld Purge Monitors® comprises: • PurgEye® 100 IP65, low cost,
eld Purge Monitors® are an essential instrument to
dustproof and waterproof hand held unit for reading down to 100 ppm. With innovative push button auto calibration, enlarged screen, low sensor indicator, tripod mount, sleep mode, vacuum sealed leak-tight probe assembly, wrist or neck strap, rubber housing protector and so much more. • PurgEye® 200, hand held,
rechargeable battery driven Weld Purge Monitor® for reading very accurately down to 10 ppm complete with electromechanical pump. The PurgEye® 200 also has an IP65 rating for its housing that is sealed against the ingress of dust and water. • PurgEye® 300 Nano, the worlds first and only super low cost, entry level, mains power driven Weld Purge Monitor® measuring accurately down to 10 ppm.
• PurgEye® 300, small,
lightweight and inexpensive with switching capabilities at high and low oxygen for alarms or welding power supplies. This monitor comes complete with software for recording purging results for evaluation and provision of a quality control document. • PurgEye® 500 that uses
an internal electro-mechanical pump to draw the gas across the sensor. It also has the switching capabilities and the PurgeLog™ software as per the 300 model above. This equally attractively priced instrument includes a unique, fast response, lifespan sensor with virtually no maintenance required. • PurgEye® 600, a computerised, touch screen model measuring very accurately from atmospheric level of oxygen, down to 10 ppm, with high and low oxygen level switching capabilities, data capture via USB using PurgeLog™ software for recording purging results for evaluation and provision of a quality control document. Readings are indicated either as parts per million or in percentage. • PurgEye® 1000 monitor
has been developed for those instances where the measuring point is more than 20 metres
18 IMT September 2015
www.internationalmetaltube.com
away from the monitor. The very slow time for the gas to travel and reach the sensor and the contamination of actual reading that can take place inside the gas tube, leads to serious delays and erratic readings. To improve this, the sensor is placed in a small module attached to a weld purge system and the reading transmitted instantaneously to a hand held display via a data cable. The PurgEye® Weld Purge
Monitor® is ideal for industries such as aerospace, pharmaceutical and food and drink, as well as many others where oxide free, zero colour welds have to be achieved and where traceability is a major advantage for the requirements of high-end Quality Control systems.
For more information, please contact:
Press: michaelareay@
huntingdonfusion.com
Sales:
hft@huntingdonfusion.com www.huntingdonfusion.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36