This page contains a Flash digital edition of a book.
WELDING PurgElite infl atable tube ® and pipe weld purging system W


hen welding tubes and pipes such as stainless, duplex, chrome etc., it is


important to purge the internal bore with an inert gas to prevent oxidisation, discolouration and to ensure a good internal weld profi le. After 40 years of innovation, design and manufacturing expertise in the fi eld of tube and pipe purging systems, Huntingdon Fusion Techniques HFT® has introduced to the market PurgElite®, a range of low cost Tube and Pipe Purging Systems to achieve a clean, oxide free, zero colour weld.


These systems are manufactured to suit pipe diameters from 1” to 24” (25 – 600 mm) and are made of low outgassing rate materials, which gives them the ability to


produce high quality welds in tubing and piping.


Other key features of this new range include: • Spinal tube that is resistant to hot metal up to 300oC (572oF) and is super fl exible to allow movement around the tightest of bends, the only manufacturer to produce this. •A new 1 inch (25 mm) system. •Quick and easy to install. • IntaCal®, an innovative purge gas


feed device with no complicated valve to set. • RootGlo®, a centrepiece glow positioning indicator allowing the systems to be positioned accurately inside the tube or pipe.


• Quick connect/disconnect fi ttings with collets and ‘O’ ring seals for gas tight sealing, fi tted with ‘Anti- Release’ circlip to prevent parts accidentally separating inside pipes.


•No metal parts to scratch the internal pipe surface. Heat Resistant Covers are available as an accessory to protect the infl atable dams, which are held on with ties and there are holes provided for the argon inlet and exhaust. The Heat Resistant Covers have a temperature rating of up to 300oC.


By using PurgElite® Tube and Pipe Purging Systems companies can save signifi cant money in both time and inert gas costs.


Measure and Validate Your Profile PROFILEMASTER® SPS Series.


In-Line Light Section Profile Measurements Systems For Hot and Cold Applications


Provides real-time dimensional, shape and angular measurement as well as cross-sectional display


• With up to 8 cameras. Modular camera setting, any shape can be captured


• Up to 16,000 points / contour (2,048/camera) = 5,734,400 points/second (with 8 cameras)


• Different colors of the lasers, thus no interference • Shape fault detection (SFD) • Creation of measurement recipe with Zumbach software: – Customer can load the profile via its own DXF file (from CAD construction) or


MRB Spinner Block


– By means of the "Product Generator": predefined forms allow quick "read in" of any product with round or rectangular size


www.internationalmetaltube.com


Learn more about PROFILEMASTER®


ZUMBACH Electronics sales@zumbach.ch I www.zumbach.com IMT September 2015 17


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36