TUBE BENDING
INDUSTRY NEWS Machines for all bending cases
sections at the recent EuroBLECH - two new bending machine sseries Platebender PB for plates and Sectionbender SB for sections. The bending specialist will also be presenting the new control for its tube bending machines and the TorqueFormer. This forms sections with complex isometrics torsion superimposed and three-dimensional.
S
The new plate bending machine series PB: Depending on the desired version, these process plates with a material thickness of only a few millimeters all the way to 125 millimeters. They are equipped optionally with three or four rollers. The number of rollers on the new section bending machine series SB is also variable. In their standard equipment the machines already have eleven axes and therefore create a larger bandwidth of bending contours. As the SB machines process as T-, I-, C- and special sections in the most varied formats and
chwarze-Robitec showed its latest solutions for the forming of plates and
dimensions, the technology is used in the most diverse sectors of industry. Thanks to the large bending moment, the SB series sections with the greatest of ease. With the patented TorqueFormer the company will present a further new development: It forms sections with complex isometrics torsion superimposed and three- dimensional. The novel technology optimized bending kinematics of cold bending and thus complex topologies with highest dimensional and contouring accuracy.
Machine control which
The new control for tube bending machines from Schwarze-Robitec reduces non-productive times to a minimum. The bending machine manufacturer has broken down the original sequence of the bending process and arranged the individual steps synchronously. While, for example, the tube is being fed to the tool, the clamping functions close almost fully. This
means that the tool is immediately ready for the next bending step when the tube reaches its target position. Interested parties can obtain detailed information about the extended product and service range from Schwarze-Robitec
More information on Schwarze-Robitec GmbH t: +49(0)221-89008-0 f: +49(0)221-89008-9920
sales@schwarze-robitec.com www.schwarze-robitec.com
International Metal Tube
The leading independent magazine for metal tube & pipe producers and processors Magazine and digital versions published 6 times a year
Please contact Vince Maynard email:
imtmagazine@virginmedia.com
26 IMT June/July 2014
www.internationalmetaltube.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32