PRODUCTS & EQUIPMENT
INDUSTRY NEWS
t cut allows high performance cutting even of welded pipes
Large / Small
Standard cutting can be realized within the parameter range 6-30 x 3 mm (stainless steel). Specially
equipped, our technology can tubes to an outer diameter of 76 mm. The shortest cutting length with pull apart is approximately 30 mm, without the pull apart procedure it is approximately 10 mm. The machine runs at the best cycle times with cut lengths
between 55 mm and 1,000 mm. After the cutting process the cut pipes can be discharged as needed. There are up to 10 stations available for this purpose. The there. The extremely high output of our cutting machines makes this necessary. This system allows several subsequent processing steps to be serviced. A special softwareprogram controls the cut optimisation system, ensures minimal scrap and thus saves material.
Maschinenbau GmbH transfluid is sought after worldwide as a partner for manufacturing tube bending machines and tube processing machines. Since 1988 transfluid has been further developing its technologies for tube machining, so that it can provide customer-oriented, tailor-made solutions – for plant and machine construction, the automotive and energy industries, shipbuilding and medical device manufacturing. As a world- renowned brand, the company from South Westphalia has subsidiaries on site in Europe and Asia.
www.tube-processing-machines.com
®
www.internationalmetaltube.com
IMT June/July 2014 17
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32