This page contains a Flash digital edition of a book.
HANGAR TALK


Lynx World Speed Record Helicopter Restored 25 Years On


After a four-year restoration program undertaken by a team of AgustaWestland apprentices, the record breaking Westland Lynx helicopter, which is still the official holder of the heli- copter World Speed Record, was today unveiled by AgustaWestland’s CEO Bruno Spagnolini and apprentices to employees gathered at AgustaWestland’s Yeovil factory. “To have held the world heli- copter speed record for 25 years highlights what an outstanding achievement it was by all those involved in the project and the development of the rotor blade technology that was key to the successful record attempt. The apprentices are to be also con- gratulated on performing an excellent restoration of this his- torically important helicopter – it is their skills and knowledge that will help keep AgustaWestland at the very fore- front of rotorcraft technology for the next 25 years,” Bruno Spagnolini, CEO, said after the


ROTORCRAFTPROFESSIONAL


unveiling. Following its World Record


breaking flight in 1986 the air- craft went on to become the test bed for CTS800-4N engines and was heavily modified before finally being retired from development flying in 1991. In January 1995 the helicopter was donated to the Helicopter Museum where it was preserved and put on public display, then in 2007 AgustaWestland agreed to undertake the restoration of the aircraft back to its World Speed Record configuration. The aircraft returned to Yeovil, where it was originally built, and the team of apprentices set about the major task of restor- ing the aircraft to as close a condition as possible to that on its record breaking flight. The team of AgustaWestland


apprentices have spent over 25,000 hours researching the configuration of the aircraft, de-modifying the aircraft, locating the original parts wherever possible, sourcing missing parts, rebuilding the aircraft and finally repainting it in its distinctive world speed record colours with all the


10


logos of those companies that assisted the original project. August 11th 2011 marks the 25th anniversary of the Westland Lynx helicopter setting a new world helicopter speed record of 249.1 mph (400.87 kph). The Lynx helicopter, reg- istered G-LYNX, flew a 15km course across the Somerset Levels at 500 ft on a calm hazy evening back in 1986 with Chief Test Pilot Trevor Egginton at the controls and Derek Clews, Flight Test Engineer alongside. The average speed achieved over two runs was 249.1 mph (400.87 kph), beating the record held by a modified Mil “Hind” helicopter by over 20 mph (32 kph). The world record flight was made possible by the use of advanced technology composite rotor blades developed as part of the British Experimental Rotor Programme (BERP) project. The BERP programme was carried out in co-operation with the UK Ministry of Defence to produce an advanced technology rotor blade, which exploits the advan- tages to be gained by aerody- namic tailoring through the use of modern composite materials and construction methods. The first BERP blades were flown on August 9th, 1985 and such was the progress achieved G-LYNX was able to claim the World Speed Record just one year later. Production versions of the original BERP blades are now fitted to all Lynx helicopters in service and the same technology is used for the AW101 main rotor blades. To this day, AgustaWestland continues to be at the very forefront of rotor technology and is currently


developing new rotor blades that will incorporate active blade technology to reduce noise and be more efficient, thereby reducing fuel consumption. The three-month program to modify a standard Lynx to world speed record configura- tion was launched on May 22nd, 1986 and included installing more powerful Rolls- Royce Gem 60 engines. These engines were cleared to operate at their maximum contingency rating, thereby boosting power by 45%. Engine power was fur- ther boosted by utilizing a water-methanol injection sys- tem. To improve yaw control a new low-set tail plane with ver- tical fins was fitted which also offload the tail rotor. A drag reduction exercise was


undertaken involving the fairing of the main rotor head, removal of external items such as steps, aerials and windscreen wipers, while joints were sealed and cooling ducts blanked where possible. ◆


Award-Winning X2 Technology™ Demonstrator Takes its Final Flight


Sikorsky Aircraft Corp.’s X2


Technology™ demonstrator has flown for the last time, the company announced recently.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52