64 DUST COLLECTORS AND ACCESSORIES
Big Red
™
Dust Hood
“Students are working together to produce pens as if they were a company.
They perform quality control of the pens then market and sell the pens for
Super sized dust hood on a rolling stand
a fund raiser.”
Shawn Jensen, Reagan High School, San Antonio, TX
With its
precision
rolling casters Table Saw Dust Collection Guard
you can easily
Protects from hazardous table saw debris
glide and
position this
Features and Specifications
• Hood is constructed from one piece,
stand to and from
clear shatterproof plastic
your most important
• Sturdy steel mast and boom construction
machines. The oversized
• Connects to a standard 4" duct system
hood has an opening 16"
• Connects to 4" dust hose
wide x 22" high x 21" deep. The stand has locking casters
• Allows tilts for 45 degree cuts
and a height that adjusts from 32" to 40" high and adapts
• Accepts saw blades up to 16 "
to most woodworking machines. Has a port for 4" hose.
• Can use with dado blades
DCBIGRED Big Red ..................................UPS $15,
$
99.95 • Boom extends to a full 83"
• Can be mounted to ceiling
• Easy setup and adjustment • Easily swings out of the way
The Big Gulp™
• Adjusts easily to suit thickness of material being cut
a76 ceiling mount
Ultimate Lathe Hood
• Accommodates splitter and anti-kickback pawls (option)
TSGUARD Table Saw Dust Guard ..................................UPS $22,
$
169.95
Easy positioning and
Replacement Hood Clear plastic hood with door and 2-1/2" port.
fits any lathe
TSGUARD-DH ..........................................................................................
$
24.95
Collecting dust while working on a large
Dust Guard Airflow Kit (shown at right) To saw
lathe while positioning and
Ideal for adjusting the dust collector airflow
cabinet
repositioning a dust collection device is a
Positions to lengths of 40"
between the saw cabinet and guard. Includes a
big hassle. The Ultimate Lathe Hood
4"x4"x4" ABS wye, connectors, hose clamps, two
solves that problem. This hood is
pieces of 8' hose and a 4" blast gate. VALUE $43.25.
To
dust
supported by a series of three slotted
Save $20 when purchased w/ Guard.
guard
arms. The hood cleverly mounts by TSDCKIT Dust Guard Airflow kit w/purchase
To dust
attaching it to lathe bed that allows the Ultimate Hood to fit ANY lathe!
of TSGUARD......................UPS $8,
$
23.25
collector
(Note: doesn’t fit lathes with single post)
• Attaches to all lathes - mini, midi with extension bed or standard size lathes
The Suppressor™ Universal
• Huge 13" x 16" hood with a 4" port collects your turning chips and dust Dust Collector Muffler
• Mounts easily and can be easily positioned for any task
• Moves horizontally with over a 40" span without remounting
Reduce noise by up to 50%
• A must for every turner
Reduce the noise from a typical dust collector by 5 to
DLGULP Big Gulp Ultimate Lathe Hood ........................UPS $10,
$
59.95
10 decibels. The Suppressor™ is designed to fit between
the motor/blower outlet and bags of any dust collector
with a 5” dia. blower to bag connection – includes nearly
Big Gulp Dust Hood
all 1-1/2 HP and 2 HP double bag collectors. The muffler is
Ideal for collecting dust from problem machines
12" long and 11" diameter and filled with acoustic i
nsulation for sound control.
HUGE 13" x 16" opening. Its
lightweight and portable and easy
SUP1000 The Suppressor™................................................UPS $9,
$
89.95
to position anywhere. Made from ABS
Plastic with a 4" port to connect to any dust
“LONG RANGER III”
collection system. Dust Collector Switch
DBGULP Big Gulp Dust Hood ..................................UPS $8
$
15.95
Heavy duty commercial quality construction
Midi Gulp
) )
) )
) )
) )
)
)
Economical hood 50 ft. Range!
Transmitter module requires
A practical 4" x 10" opening. The hood will work for a
9 volt battery - included
variety of dust collecting applications.
Advantages Of “Long Ranger III” Includes:
DBGULP2 Midi Gulp ......................................
$
9.95
• Simple,reliable operation.• 5 ft. cord on the receiver module • F.C.C. approve
• Available in 110V and 220V versions. • Multiple frequency codes.
Table Saw Dust Hoods
• Grounded w/reset button • Uses R.F. signal, not affected by: outside
interference transformers, electrical noise, or 3 Phase power sources
Made from durable ABS plastic
Sized to fit most 8" to 12" contractor type table saws.
LR110-3 110V System Incl: Transmitter, 1-1/2 H.P. relay/receiver ....
$
64.95
LR220-3 220V System Incl: Transmitter, 3 H.P. relay/receiver..........
$
74.95
DT2 Dust Hood, Overall size 12" x 12" x 2-1/2" ........................
$
8.95 LR2244 220/440V System for the PSI 3.5HP or 5.0HP Cyclone;
DT4 Dust Hood, Overall size 14" x 14" x 2-1/2" ........................
$
9.95 Transmitter, up to 7.5HP relay/receiver............UPS $8,
$
119.95
TO PLACE AN ORDER Call Toll Free: 1-800-858-9295 Fax with P.O. 215-676-3716
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72