PROJECT MAKING ACCESSORIES 55
Drill Press Lathe Mini Lathe Toolrests
For turning small
Solid tool rest will provide the ultimate
spindles or any of our chisel control
small lathe projects
L57840 Solid Bar Toolrests
The attachment includes a ball
The smooth steel surface allows the tool to glide over the bar
bearing tailstock center, a
and the dense steel alloy allows vibration free turning.
L57840
sturdy vertical 12" toolrest, a
2 pc set for Mini lathes with 1/2" toolrest posts (Carba-
spur center and a screw chuck.
Tec). Includes 6" and 9" long toolrests with a 1/2" top bar.
Add our PKM-DL mandrel and
CLTSET12 2 pc 1/2" post ....................................
$
19.95 set
you are ready to make pens,
3 pc set for Mini lathes with 5/8" toolrest posts (Jet,
pencils etc. on your Drill Press!
Delta, Turncrafter Pro). Includes 6", 9" and 12" long toolrests
with a 5/8" top bar.
DPLATHE Lathe Attachment ....................................................
$
21.95 CLTSET58 3 pc 5/8" post ......................................
$
29.95 set
L57841 Solid Bar “S” Toolrests
Multi Size Drill Guide
L57841
CLTS2 “S” toolrest 1/2" post & top ........................
$
14.95
CLTSJ “S” toolrest 5/8" post & top ........................
$
19.95
Drill accurate 7mm, 8mm, 3/8"or
10mm holes in your pen blanks
L57842 Solid Bar 3" Radius Toolrests
Off center design give a longer reach for inside or outside
using only a hand drill.
L57842
surfaces of the bowl.
This hardened metal guide includes built-in CLTC12 Curved 1/2" post & top ................................
$
14.95
bushings for the 4 most popular hole sizes
CLTC58 Curved 5/8" post & top ................................
$
14.95
for pen tubes. No special drill press jigs or fixtures are necessary.
L57843 Heavy Duty French Curl Toolrest (5/8" post)
L57843
PK-DGMULTI Multi Size Drill Guide................................................
$
15.95 ea You can shape bowls up to 10" dia. outside and hollow bowls
as small as 6" in dia. inside. Overall size: 4" high, 8-1/2" wide &
Pen and General
made from heavy duty cast iron. Compatible with midi lathes with
5/8" posts such as the Turncrafter Pro, Delta, or Jet.
Disassembly Tools
a71
A
CLTSJ2 French Curl Toolrest ....................................
$
14.95
Remove pressed on parts from
assembled pens or pencils
a71
B
Salvages parts and allows refinishing
Super Powerful Rare-Earth Magnets
barrels.
a71
C
Lifting capacity is
a71
2-1/2 lbs for the
A PKDISPEN 7mm Pen Disassembler ....................................
$
12.95 ea
a71
B PKDISPCL 7mm Pencil Disassembler ................................
$
12.95 ea
1/4" magnet up to
a71
C PKDIS10 Disassembles all 10mm kits ..............................
$
9.95 ea
30 lbs for the 1"
magnet.
Face Plates
You’ll find a multitude of
CF6 6" face plate (1" x 8tpi) ..........
$
29.95
uses for these powerful SIZE QTY/PACK PRICE
CF4J 4" face plate (1" x 8tpi) ..........
$
17.95
“Rare-Earth Magnets.” EMAG14 ....1/4" dia x 1/10"....20 ......
$
9.95/pack
CF4 4" face plate (3/4" x 16tpi) ....
$
17.95
Make jigs, fixtures, EMAG38 ....3/8" dia x 1/10"....10 ......
$
4.95/pack
L57812 CF3J 3" face plate (1" x 8tpi) ..........
$
16.50
CF3 3" face plate (3/4" x 16tpi) ....
$
16.50
clamps, tool holders or EMAG12 ....1/2" dia x 1/8"......10 ......
$
9.95/pack
the best fridge magnet EMAG34 ....3/4" dia x 1/8"......10 ....
$
19.95/pack
L57813 CF2J 2" face plate (1" x 8tpi) ..........
$
11.95
CF2 2" face plate (3/4" x 16tpi) ....
$
11.95
L57813 in the world. EMAG10 ........1" dia x 1/8" ......5......
$
19.95/pack
L57812
Double-faced Mounting Tape
Mount blanks to face plates
4'' Mighty-Micro Table Saw
Strong bond. 3/4" width x 108 ft mounting tape Cut small precise parts with the
CMTAPE Mounting Tape ............................
$
13.95
Mighty-Micro™ table saw.
Quick, easy and safe to use – this micro saw is
Mini Brass Barrel Hinges
perfect for hobbyists and model makers.
Ideal for small boxes
SPECIFICATIONS:
Simply drill a 5mm hole to accept the hinge. The
• Max. Depth of cut: 3/4"
installed hinge operates smoothly. Sold in packs of 10.
• Includes 2 each - 4" dia.,
BHINGE Hinges......................1-9 Packs
$
5.10 pk
24 tooth Carbide blades
10+ Packs
$
4.60 pk
• Motor: 1/8HP, 110V, 4500 RPM, 1/2" arbor
• Table 7-1/2" x 5-1/2", 1/16" Kerf Cast aluminum table and cast iron base
PSI Multi Function Guide
• Miter gauge and safety guard included
This guide is an adjustable square,
MTS3 Mighty-Micro Table Saw .................................. UPS $8,
$
59.95
level, ruler, and a center marker.
REPLACEMENT BLADES 4" Carbide tooth blades, 1/2" arbor
Overall length is 12". MTSBL24T 24 Tooth Carbide Replacement Blade ..........................
$
9.95
LCFIND ......................................................................CLOSEOUT $4.95 MTSBL40T 40 Tooth Carbide Replacement Blade ..........................
$
9.95
FOR ASSISTANCE Call Toll Free: 1-800-847-8984 E-Mail:
pam@pennstateind.com or
www.psischools.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72