52 PROJECT MAKING ACCESSORIES
CSCBARR4 Specifications Barracuda4 Powergrip Key Chuck L57841
Body Weight 8 lbs
9-piece lathe chuck system for large lathes
Standard Thread 1-1/2" x 8tpi
Body Diameter 4-1/2"
Good for full size lathes of 1-1/2 HP or more
Jumbo Jaws (External Grip)* 4" to 10"
This heavyweight, heavy-duty, large body chuck is ideal for larger
Woodworm Screw Chuck Included
lathes. Designed to be used on lathes with 10" swings and larger -
Holds Round/Square Stock Yes
#2 ROUND JAWS (pre-mounted) JUMBO FLAT JAWS
* Sold Separately
use it for your heaviest and largest turnings. Its geared key
mechanism provides a powerful grip capable of holding large
(not included)
diameter work. The “T” handled key allows single hand tightening with a long shaft that
#3 WIDE JAWS
clears larger diameter work. The Barracuda4 Powergrip Chuck comes with many extras
PIN JAWS including; #1 step jaws, #2 round jaws (pre-mounted), #3 round jaws, pin jaws, a screw
chuck, long shaft chuck key, a “T” handled allen wrench and a wooden carrying case. The
chuck comes standard with a 1-1/2" x 8 tpi mount. Headstock adapters are available for
other lathes. Weight is 8lbs with a large 4-1/2" diameter chuck body.
CSCBARR4 Barracuda4 System with 1-1/2" x 8tpi thread ..................UPS $10,
$
219.95
XCSCBARR4 Barracuda4 Chuck Body (no jaws included)..................................
$
169.95
Includes chuck key, Allen wrench & 8 jaw screws
#1 STEP JAWS
L57840 Jumbo Flat Jaws for Barracuda4 - Ideal for finishing the bottom of bowls. Includes 8
rubber grips. Opens to grip bowls from 4" to 10" internally (will not fit PSI Chucks with “C”-style
jaws). Compatible with lathes with 12" swings and larger.
SCREW CHUCK SPINDLE ADAPTER
L57841 BARR4FJ3 ..............................................................................................UPS $8,
$
36.95
(not included)
4 sets of jaws included
From To From To
#2 Jaws (External Grip) 1-3/4" 3-11/16" Pin Jaws (External Grip) 1/4" 2"L57840LABAR418 Spindle Adapter to 1" x 8tpi ..............................
$
14.95
LABAR4114 Spindle Adapter to 1-1/4" x 8tpi........................
$
14.95
(Internal Grip) 2-3/8" 4-1/2" (Internal Grip) 1-1/8" 2-7/16"
#3 Wide Jaws (External Grip) 3-11/16" 5-9/16" #1 Step Jaws (Internal step 1) 3/16" 2-1/4’
LABAR4M33 Spindle Adapter to M33 x 3.5 ............................
$
14.95 (Internal Grip) 4-3/8" 6-1/2" (Internal step 2) 15/16" 3"
Replacement & Accessory Jaws for all “C” style chucks
Headstock
Spindle
L57840 CJAW1 #1 Step Jaws ............
$
19.95L57841
L57840 Converters
L57841 CJAW2 #2 Round Jaws..........
$
22.95
CJAW2DT #2 Round (standard)
$
22.95
Convert your spindle
so that you can use
L57842 CJAW3 #3 Round Jaws..........
$
22.95
chucks with different
L57843 CJAWPC #1 Pin Jaws................
$
19.95
thread sizes.
L57844 CJAWFJ1 Small Flat Jaws ........
$
29.95
L57845 CJAWFJ2 Jumbo Flat Jaws ......
$
34.95
to headstock to chuck
L5818 ............Shopsmith™ 5/8" ....1" x 8tpi ..........
$
16.95
L57842L57843L57844L57845
LA3418 ..........3/4" x 16tpi ..............1" x 8tpi ..........
$
16.95
LA1834 ..........1" x 8tpi ..................3/4" x 16tpi ....
$
16.95
LA11418 ........1-1/4" x 8tpi ............1" x 8tpi ..........
$
19.95
LA341018 ......3/4" x 10tpi ..............1" x 8tpi ..........
$
16.95
LAG1218........1" x 12tpi ................1" x 8tpi ..........
$
24.95
LA11218 ........1-1/2" x 8tpi ............1" x 8tpi ..........
$
19.95
Small Flat Jaws open to 5" Jumbo Flat Jaws open to 8"
LA3318 ..........M33 x 3.5tpi ............1" x 8tpi ..........
$
19.95
10 Pc Expanding 1-3/8” Expanding
Jam Chuck System Collet Chuck
Solves the jam chuck problem
Mount pocket watch blanks or small
Hand turning the chuck is time
bowls with this double duty chuck
consuming and not always accurate. As a Collet Chuck - Drill a 1-3/8" hole about
Insert the system’s tough rubber chuck
3/8" deep into your work (the diameter of most
into your work then expand it by
mini-clock fit-ups.) Insert the chuck and twist it - expanding the jaws up
turning a nut to conveniently secure
to 1/8" for a firm inside grip. Allows your work to be removed and
the workpiece. This remarkable
remounted with no loss of concentricity. Converts to a Screw Chuck -
package includes five chucks plus the
Simply remove the collet jaws and screw in the supplied screw center.
Forstner bits to drill the jam chuck holes.
FREE with purchase! 1-3/8" Forstner Bit! A $12 Value
Chuck and Bit sizes are 3/4", 1", 1-1/4", 1-1/2", and 2".
CXC 3/4" x 16 tpi spindles ..
$
29.95 CXCMT2 #2 Mt spindles* ......
$
29.95
CJAM10 10 pc Jam Chuck System............................................
$
39.95 set CXC4 1" x 8 tpi spindles ........
$
29.95 *(requires draw bolt)
TO PLACE AN ORDER Call Toll Free: 1-800-858-9295 Fax with P.O. 215-676-3716
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72