54 PROJECT MAKING ACCESSORIES
“Super Drive” 4 Piece Drive Center
Revolving Tailstock Set for #1 MT and
L57840
Center
#2 MT Lathes
This multi-tooth live tailstock Includes hard to find
center provides a great grip
replacement centers
L57841
Avoids splitting your wood. It has sealed
For lathes equipped with #1MT or #2MT headstock and tailstock centers.
bearings and spring loaded point for easy positioning and wood removal.
Packaged in convenient wood box. Includes: 5/8"dia. headstock spur center
A LCENTTS1 #1MT 1/2" dia. Super Tailstock Center ..................
$
39.95
for narrow spindles • 1"dia. headstock spur center for standard spindles •
LCENTTS2 #2MT 3/4" dia.Super Tailstock Center ..................
$
39.95
Live ball bearing tailstock center with cup and point • Hollow center for
Live Tailstock Center
drilling 5/16" (#2MT) through holes (for lamps, etc) and 3/16" (#1 MT).
Large & heavy duty with 60" point and ball bearing precision
LCENT4 MT #2 4-pc Drive Center Set ........................................
$
39.95
B LCENTLT1 #1MT 1-1/4" dia. Live Tailstock Center ..................
$
19.95
LCENT41 MT #1 4-pc Drive Center Set ........................................
$
39.95
LCENTLT2 #2MT 1-11/16" dia. Live Tailstock Center..............
$
19.95
LCENTLT1X MT #1 Live Center ..........................................................
$
19.95
LCENTLT2X MT #2 Live Center ..........................................................
$
19.95
Live Tailstock
Chuck Adapter Safety Drive Center
Allows precision centering of Avoids the problems encountered
spindles or dowels at the tailstock end when a tool catch occurs
It provides the ideal system for the mounting bowls for Ideal for novices or advanced turners. The smooth grip round blade supplies
hollowing; after turning the outside of the bowl blank, plenty of pressure to drive your spindle but causes the work to harmlessly slip
turn a tenon on the bowl bottom. Then mount your chuck when a catch occurs. The grip pressure is adjusted by loosening or tightening
to the tailstock using the adapter; grabbing the tenon with the chuck while your tailstock. Includes an adjustable spring loaded center point to center and
still attached to the faceplate. When the chuck and blank is remounted on the avoid splitting your spindle as tailstock pressure is applied.
headstock, your bowl will be perfectly centered.
LCSAFE1 5/8” dia Safety Center w/ #1 MT Mount ..................
$
19.95
LTCA18 1" x 8tpi mount & #2MT shaft ........................................
$
34.95
LCSAFE2 1” dia Safety Center w/#2 MT Mount........................
$
19.95
LTCA34 3/4" x 16tpi mount & #1MT shaft ..................................
$
34.95
Super 4-Prong Center
Live 1/2" Tailstock
Gives a strong bite into wood.
Drill Chuck
Features a spring-loaded center point that simplifies positioning your spindle
Get precision centering and griping of your work
and retracts to avoid splitting work when tailstock pressure is applied.
at the tailstock end of your lathe. Ideal for holding mandrels, dowels and LCENT3158 #1MT - 5/8" dia ........................................................
$
17.95
tenons up to 1/2" dia. Features smooth precision ball bearing operation.
LCENT3258 #2MT - 5/8" dia ........................................................
$
17.95
Available for tailstocks that accept either #1 or #2 Morse Taper adapters.
LCENT3210 #2MT - 1" dia ............................................................
$
17.95
LDC1MT #1 MT Live Drill Chuck........................................................
$
34.95
LDC2MT #2 MT Live Drill Chuck........................................................
$
34.95
2-Prong Split Blade
Drive Center
Morse Taper for
Mounts irregular surfaces
Lathe Headstocks
L57840
It will help in mounting rough, uneven bowl blanks and simplifies re-
or Tailstocks
surfacing bowl blanks in preparation of faceplate mounting.
Used for grabbing small keyless style
CENT2P #2 MT -1" dia..................................................................
$
14.95
turnings or pen mandrels on the
headstock - or a drill bit in the
Mini 4-Prong Drive Centers
L57841
tailstock. Accepts a 1/4" x 20 draw bolt.
With a diameter of only 3/8" these centers are
L57840 TM-21 #1 Morse Taper, 3/8" Chuck (Carba-Tec, TCLPLUS) ................
$
25.75
ideal for turning smaller radius spindles. They
L57840 TM-31 #1 Morse Taper, 1/2" Chuck (Carba-Tec, TCLPLUS) ................
$
29.95
also provide easier access to the ends of larger
L57840 TM-22 #2 Morse Taper, 3/8" Chuck (Delta, Jet, TCLPRO) ..................
$
25.75
diameter spindles. Polished and hardened steel.
L57840 TM-32 #2 Morse Taper, 1/2" Chuck (Delta, Jet, TCLPRO) ..................
$
29.95
LCENTMDC1 #1MT Mini Drive Center..............................................
$
14.95
PMLA-DC 1/2" Chuck (3/4" x 16tpi Screw-on) ..................................
$
29.95
LCENTMDC2 #2MT Mini Drive Center ............................................
$
14.95
L57841 TM-31KL #1 Morse Taper, 1/2" Chuck (Carba-Tec, TCLPLUS) ................
$
34.95
L57841 TM-32KL #2 Morse Taper, 1/2" Chuck (Delta, Jet, TCLPRO) ................
$
34.95
2-3/8" Replacement Jaws
The PSI Super Centers
Ideal for large bowls
L57842
For 1-3/8" Expanding Collet Chuck.
Get a better bite on your spindle
L57843
CXC238J 2-3/8" Replacement Jaws ................
$
20.55
A spring-loaded point simplifies the positioning FB238 2-3/8" Forstner Bit..............................
$
16.95
of your spindle in the center and retracts to avoid s
plitting your work when tailstock pressure is applied.
Mini Screw Chucks
LCENTSS11 #1MT 1/2" Crown..............................................
$
19.95
Ideal for small bowls
L57842
LCENTSS12 #1MT 1" Crown..............................................
$
19.95
Includes a replaceable #10 (3/16") screw, & a set screw.
LCENTSS21 #2MT 5/8" Crown..............................................
$
19.95 PK-TOP-M Mini Screw Chuck for 3/4" x 16" tpi ..
$
17.45L57843
LCENTSS22 #2MT 1" Crown..............................................
$
19.95 PK-TOP-MJ Mini Screw Chuck for 1" x 8" tpi........
$
17.45
TO PLACE AN ORDER Call Toll Free: 1-800-858-9295 Fax with P.O. 215-676-3716
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72