60 PROJECT MAKING ACCESSORIES
HSS Heavy
Bowl Turning Starter Set
Duty Inboard
Save up to $100 with purchase of the
Bowl Scraper complete set
If you want to get a jump start on turning beautiful
Ideal for bowl turning
bowls, this starter package is for you. Includes
and deep hollowing
everything you need to get started – even a lathe if
you need one!
Because of their thick blades
and mass, they are very stable
Item # Description VALUE
LBTDVD Instructional DVD $29.95
and cut aggressively without
CLTSJ “S” Toolrest $19.95
vibration. Use the larger scraper
LCBT4 4 piece HSS Bowl Turning Chisel set $69.95
to rough out your work and use FB2 2" Forstner Bit $16.95
the smaller one for finishing. The
PKSWAXL1 250 ml Shellawax liquid finishing wax $24.95
set includes 2 scrapers
LBCAL Bowl thickness measuring caliper $22.95
PKMESHKIT 5 grits, 10 sheet ABRANET Sanding kit $10.95
Larger Scraper: 19" overall length 2 quality bowl blanks $21.90
with 6" long x 1"wide and 3/8"
Value if purchased separately ......................................................$217.55
thick blade
LBTSS1 Buy the Starter set and save $28!....................................................................UPS $10,
$
189.55
Smaller Scraper: 16" overall length with
Add a #CSC200C Barracuda Chuck with Jumbo Jaws ................................$154.90
LBTSS2X Save a total of $75 when purchased with starter set..............................UPS $20,
$
324.45
6" long x 3/4" wide and 5/16" thick blade
Add a #TCLPRO Turncrafter Pro Midi Lathe................................$169.95
LCSIDE2 HSS Scraper Set..................
$
49.95 Set
LBTSS3X Save a total of $100 when purchased with all starter sets ..........................UPS $62,
$
489.40
Bowl Thickness Calipers 4 Piece Bowl Turning Chisel Set
For measuring and
We’ve taken the guess work out of the
maintaining the
choice of chisels and gouges when you
proper wall
want to turn a bowl.
thickness of your
Attractive wooden carrying case included.
bowl
The set includes:
Transfers your bowl’s wall
thickness measurement to
• 1" Round Nose Scraper – 16-1/4" L w/ 6-1/2" blade
the outside caliper tips
• 3/4" Round Nose Side Cutting Scraper
without removing it
– 18-1/4" L w/ 6-1/8" blade
from your work. 8" from • 5/8" Bowl Gouge –22-1/2" L w/ 8-7/8" blade
pivot to tips.
• 1/2" Bowl Gouge –22-1/2" L w/ 8-7/8" blade
LBCAL 8" calipers ..................
$
22.95 LCBT4 Bowl Turning Set ............UPS $8,
$
69.95
Faceplate Screw Chucks
Dedicated Bowl Finishing Chuck
Mount your bowls snuggly
Key operated!
and securely Introducing the breakthrough convenience of our new
Dedicated Bowl Finishing Chuck. Save the time (10-15
With this dedicated
minutes) and the inconvenience of swapping and installing
chrome-plated screw
jumbo jaws on your lathe chuck every time you have to finish the bottom of a bowl.
chuck just mark the center
This dedicated chuck is a necessity for every bowl turner. The chuck includes a set
of your blank then screw on
of pre-installed jaws large enough to make an 8-1/2" bowl. The chuck features a key
the chuck at the marked center then
operated chuck body for quick and firm positioning, a chuck key, and
secure with mounting screws.
2 sets of grip pins. Pre-threaded for a 1" x 8tpi headstock. Adapts to other
The combination of screw
headstocks with PSI thread adapters.
chuck and faceplate mount
LCJC8 Bowl Finishing Chuck with 1" x 8tpi thread ........................UPS $8,
$
119.00
provides a very safe and
secure bowl turning setup.
1" x 8tpi faceplate mount.
Adjustable Pin Tool Rest
Includes mounting screws.
Tired of your bowl gouge slipping on your tool rest and jamming when hollowing?
CF3SC 3" faceplate/screw chuck Problem solved. This new tool rest features a vertical pin on top to give you improved control, better contact
with 3/4" screw & 4 counter
and a more consistent cut. Just position your gauge against the pin and
sink mounting holes ..
$
16.95
you'll experience better control and more confidence when hollowing.
The toolrest is either 5/8" or 1" in diameter, 9" long. Pivot pin is 1-1/4"
CF4SC 4" faceplate/screw chuck
with 1" long screw & 8
long and can be in two different positions along the toolrest.
counter sink mounting 2 pivot
CLTP58 Pinned Toolrest with 5/8" post ..............................
$
14.95
holes ..............................
$
19.95 point positions CLTP1 Pinned Toolrest with 1" post..................................
$
17.95
TO PLACE AN ORDER Call Toll Free: 1-800-858-9295 Fax with P.O. 215-676-3716
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72