C DEVELOP AND EMPLOY A METHODOLOGY FOR SELECTING LIGHTING
PRODUCTS.
1 Obtain relevant project information to provide the most accurate and
complete lighting specification.
a Determine all parameters and physical characteristics including room
dimensions, finishes, ceiling cavity conditions, exterior conditions, etc.
b The design, specification and locations for remote power supplies to
luminaire’s, such as low voltage transformers or other power equipment, is
typically within the services of the electrical engineer. However, alternate
responsibilities within the project team may need to be discussed for
coordination, as required.
c Identify estimated operating temperatures where products are to be located
(i.e. ambient temperature can be a factor).
2 Conduct mock-ups to assess or demonstrate lighting performance, when
necessary.
3 Understand and monitor the project design and construction schedule.
III ACTIONS IN THE PROJECT’S CONSTRUCTION DOCUMENT PHASE
A SPECIFICATION OF THE DESIRED PRODUCT(S).
GUIDELINES
1 Use an annotated luminaire schedule or table (a.k.a. lighting fixture
FOR SPECIFICATION
schedule) and a written luminaire specification for each luminaire type to
INTEGRITY give explicit luminaire descriptions. Note: Refer to the “Specification
DOCUMENT
Approaches” section of this document for detailed information on
formulating a specification strategy.
2 Separate and identify special types from “commodity” items, especially
when multiple name specifications are required. Note: Work with the
manufacturer to give you a product number that they can identify and
price the custom or special luminaire. This will help avoid confusion later
in the bid phase.
3 Inform local manufacturer representatives of the lighting equipment you
plan to specify. It is helpful to foster open communication on the project
for assistance with providing accurate pricing, project tracking and allowing
them to register the project for proper credit.
B PREPARE ADEQUATE DOCUMENTATION WHICH MAY INCLUDE PLANS,
SPECIFICATIONS, SCHEDULES, DRAWINGS, DETAILS AND/OR OTHER
DOCUMENTS WHICH MAY BE REQUIRED TO FULLY DESCRIBE PROJECT
REQUIREMENTS FOR A SUCCESSFUL LIGHTING DESIGN.
10
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28