SHAKEOUT/CLEANING/FINISHING GK Blast Load Feeders


Tumble Blast Equipment


One unit. Problem solved. T e GK Blast Load Feeders are engineered to handle multiple process lines and accommodate elevation changes. T ese units can be designed to index forward, backward, up, down, sided to side, as well as convey material in multiple directions to meet your foundry’s requirements. Custom sizes and optional automated gates, weigh cells and more allow you to precisely monitor and feed multiple shot blast machines with a single vibratory unit.


GENERAL KINEMATICS CORP. 5050 Rickert Rd., Crystal Lake, IL 60014 815-455-3222  Fax: 815-455-2285 mail@generalkinematics.com  www.gkfoundry.com


Crushers


Blast Cleaning Technologies Tumble Blast Systems are en- gineered and designed to achieve increased productivity and uptime, durability and easier access and maintainability. Our designs are available in 14, 22, 28, 34, 50, 60 and 76 cubic ft. Designed with our high productivity e-Wheel™, heavy-duty abrasive valves, improved seal and door design, air-wash or magnetic separation systems also available in a fl oor mounted design for low headroom challenges and accessibility.


BLAST CLEANING TECHNOLOGIES A division of Metcast Service Tech Resources 16211 W. Lincoln Avenue, New Berlin, WI 53151 877-355-7577  Fax: 262-785-1066 www.bct-us.com


HVLV Impregnation System


T e Crocodile Runner Breaker from Yuatsuki is designed to break returns, such as gates, sprues and scrap castings. Ca- pacities range from 4 to 20 tons/hr. Inquire for larger sizes. VIKING Technologies is the U.S. and Canadian distributor of these low maintenance units, which feature automatic lubrication systems and an adjustable exit opening, allowing the material to be crushed to the desired size. T e crushing plates and teeth are made from high wear steel, ensuring long life, proven by over 150 units installed worldwide.


VIKING TECHNOLOGIES


25169 Dequindre Rd., Madison Heights, MI 48071 678-524-0025  Fax: 248-564-0857 marty.putnik@viking-technologies.com www.viking-technologies.com


METALCASTING EQUIPMENT, PRODUCTS & SERVICES 2014-15


Godfrey & Wing’s HVLV Impregnation System provides state-of-the-art impregnation technology in the smallest possible footprint and at a capital cost that makes impregna- tion aff ordable for any OEM or manufacturer. T e HVLV system utilizes dry vacuum and pressure processing, the most robust impregnation process available. It is capable of pro- cessing up to 15 cycles per hour of the most complex castings in less than 84 square feet without risk of contamination or damage. With over 100 installations globally, GW’s impreg- nation technology has demonstrated that it delivers more sealed parts at the lowest cost.


GODFREY & WING, INC. 220 Campus Drive, Aurora OH 44202 330-562-1440  Fax: 330-562-1510 tshantz@godfreywing.com  www.godfreywing.com


29


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40