We try to make each edition
of the magazine interesting to all of our readers and cover a great range of different subjects.
The summer issue of Commercial Micro Manufacturing brings you a great variety of micro and MEMS-related topics. We try to make each edition of the magazine interesting to all of our readers and cover a great range of different subjects.
In the July/August issue we present to you a feature on photo etching of aluminium, written by Albert Tsang of Precision Micro, and a look at the Micro Systems Vienna facilities, in which we find out more about the company’s lab-on-a-chip capabilities.
Our metrology section in this issue is quite extensive, with case studies on scanning electron microscope from Nikon Metrology and accurate sample measurements from ZEISS.
The amazing high-precision possibilities of hexapods are presented in an article prepared for us by specialists from Physik Instrumente and the University Hospital in Ulm. Our special focus in this issue is on organic and printed electronics and I’m happy to share with you a review of the recent LOPEC Exhibition and Conference. The new and exciting opportunities are also shown in the second article we publish in association with the European Photonics Industry Consortium: Joost van Kerkhof and Douwe Geuzebroek of XiO Photonics in the Netherlands have written a feature on Photonic Integrated Circuits for Visible Light.
From the
editor
The MEMS section presents the results of another MEMS Industry Commercialization Report Card Study. This report, prepared by our Editorial Advisory Board member, Roger Grace of Roger Grace Associates, has been featured in CMM magazine in the last couple of years, and the results of last year’s edition are as interesting and enlightening as ever.
I hope you enjoy all these features, as well as our regular columns from the biggest names in the industry.
Aleksandra Jones Editor
LET US TAKE CARE OF YOUR MEMS MANUFACTURING
MUCH MORE THAN A MEMS FOUNDRY. Whether you need wafer processing, MEMS assembly, or MEMS design services, we have the experience to help you succeed. Tronics provides one of the broa- dest MEMS technology portfolios in the industry – and across the globe – with wafer fabs in Europe and the United States.
Discover the Tronics difference at
www.tronicsgroup.com 3| commercial micro manufacturing international Vol 7 No.4
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52