Advertorial
TECHNOLOGY IN ACTION
SCHURTER launches the first cord retaining system for IEC C8 appliance inlets
The perfect lawn in
time for summer with Drive Lines and IMS Gear
I
MS Gear, a German leader in gear manufacture, specialise in planetary gearboxes both standard
and customised such as the Ambrogio lawn mower robots. The robots mow grass areas up to 3,200m2 and can automatically avoid obstacles like
trees,
detect rain and climb gradients up to 30°. The robot has sensors designed to detect longer and shorter blades of grass and control blade speed and height to save battery power. The robot uses the PM32 3 stage planetary gear with 4.5Nm output torque and reduction ratio of i=169:1. The ring gear is made of steel to be hard wearing. General Purpose Planetary Gearheads can be used with virtually any motor and offer cost effective torque enhancement and speed reduction. Tailor-made, not just off the shelf, there are an incredible 10000 different combinations.
Drive Lines Technologies Tel: 01234 360689 Web:
www.drivelines.co.uk
enter 800
CHURTER expands its broad range of cord retaining systems to include a new clip retaining device for IEC C8 inlets and mating cord sets. The new clip device is a further addition to the already successful broad range of SCHURTER cord retaining systems for IEC C14 & C20 inlets, comprised of V- Lock latching cord sets wire- bails and clamps.
S
For some time now, V-Lock, wire-bail and clamp systems have proven successful solutions in preventing the accidental disconnection of power cords from inlets according to IEC 60320. However, these systems are, so far, only available for C14 and C20 appliance inlets. SCHURTER has now developed a cord retention system, with specially adapted retaining clips for C8 type inlets. The clips fit SCHURTER series 2576 flange mount and 2578 snap in mount inlets.
The IEC C8 inlet can save up to 34 percent of space compared to the C14 inlet with wire-bail system and therefore provides the potential for further equipment miniaturization, depending on the power requirements of the application. In addition, the new cord retaining system is more efficient in assembly and in terms of fixation of the cord set. The retaining clip is easily installed, requiring only one screw to fasten it to the panel. For the flange mount inlet, series 2576, the retainer is attached with the same screw as used to secure the inlet flange and thus needs no additional material.
The system is available either as a kit together with the C7 power supply cord or separately for retrofitting. The retaining clip is designed and tested with SCHURTER C8 inlets and mating cord sets to ensure a retaining force of up to 200 N. While other cord sets on the market may be compatible, technical specifications apply to SCHURTER types. The corresponding C7 power supply cords according to IEC 60320 are available in lengths of two or four meters and can be fitted with European or American plugs as required.
Schurter Ltd Tel: 01243 810 810
New Wireless Access Point T
Extends the Reach of EtherNet/IP, Eases Access to Production Data enter 802
Web:
www.schurter.co.uk enter 801
o make accessing critical production data easier within the manufacturing enterprise,
Rockwell Automation has
launched the Allen-Bradley Stratix 5100 wireless access point (WAP) featuring a work group bridge.
Unlike typical
wireless clients that only connect a single IP address, the Stratix 5100 WAP enables engineers to connect up to 20 IP addresses simultaneously – helping reduce design time when integrating machines and equipment into the industrial control network.
The Stratix 5100 WAP is ideal for
industrial networks needing secure and reliable wireless connectivity. Enterprise- class silicon and optimized radios deliver a robust mobility experience that includes 802.11a/b/g/n with 3 by 4 multiple-input multiple-output (MIMO) technology and three spatial streams.
“Automation engineers increasingly need access to more detailed production data and to solve automation network connectivity problems,” said Rob Snyder, product manager, Rockwell Automation. “With the Stratix 5100 wireless access point and work group bridge, users can access production data from remote and difficult-to-reach areas. They can share this data between automation systems or feed it into information systems for analysis and improved decision making.”
The Stratix 5100 WAP uses Cisco IOS, providing world-class performance and configuration options. In addition, the Stratix 5100 WAP provides premier integration to the Rockwell Automation Integrated Architecture system with detailed network diagnostic information. The Stratix 5100 WAP is currently available and complements the Allen Bradley ControlLogix EtherNet/IP communication modules and full portfolio of Stratix switches from Rockwell Automation.
Rockwell Automation Ltd 36 JUNE 2014 | DESIGN SOLUTIONS Tel: 0870 242 5004 Web:
www.rockwellautomation.com
Earth bonding hinges D
oors for switchgear
cabinets and other electrical enclosures no longer need to have earthing straps. Instead, cabinet doors can be fitted and removed quickly, simply and safely using the new earth bonding hinges from Multi-Contact. The hinges make a high quality earth connection automatically when the door is hung on the cabinet. As with conventional hinges, the lower section is fitted to the cabinet and the upper section to the door.
The electrical connection is made by a
flat Multilam contact strip on the side of each hinge section, and a third Multilam in the joint pin.
Safety is enhanced, as there is no risk of forgetting to fit earthing straps, or not fitting them correctly. Also, EMC properties are better than with systems using earthing straps.
Offering IP66 environmental protection, the hinges are suitable for indoor and outdoor applications. There are two standard versions for stainless steel and aluminium alloy housings, with versions for other housings available on request.
Multi-Contact (UK) Ltd Tel: 01908 265544 Web:
www.multi-contact.com
enter 803 / DESIGNSOLUTIONS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44