feature By Police Marksman Staff Glock Mag Tool (GMT)
A fellow police offi cer has come up with the Glock Mag Tool to quickly disassemble the base of Glock magazines without causing any damage to them. T is ingenious chunk of aluminum is a must-have for the serious Glock armorer. Simply place the unloaded magazine inside the machined opening and it will line itself up and press the retention pin. Press down once and the baseplate will begin to move. T en reposition the magazine to the machined step-down and press again. T e baseplate will move to the perfect position where it retains the inner spring and you can cup it in both hands to capture the spring and remove it. T e GMT causes no damage to your magazine like a screwdriver and pliers may. T e GMT-S fi ts Glock models 17, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, and 35 with standard base plates. T e GMT-L fi ts models 20, 20SF, 21, 29, 37, 38, 39, and 41 with standard base plates. Either GMT is avail- able at
www.precisiontr.com for $24.95 each.
www.precisiontr.com MS Clean LLC AR-15 Magazine-Shaped Cleaning Kit
www.mscleankits.com LaserLyte® Training Tyme Kit for MSRs
LaserLyte® announced a one-of-a-kind training kit for owners of modern sporting rifl es that includes the LaserLyte® .223 laser cartridge trainer, a 32-inch push rod, an over-sized charging handle, and a charging block that prevents live rounds from being chambered. T e LaserLyte® LT-223 laser cartridge trainer fi ts inside the cartridge chamber and features a fi ring pin activa- tion switch that indicates the bullet’s impact with a bright red laser dot. T e built-in snap cap protects the fi ring pin and O-rings hold the laser in place accurately and allow for repeated practice without compromising accuracy. T e rimless cartridge trainer will not accidentally eject even with constant racking. T e charging block is a small round plug that goes in the buff er tube spring that allows only 1.75 inches of travel. It is within this short distance that the user can cock the rifl e for another laser shot. Motion is kept to a minimum with no over-travel. T e charging block also acts as a safety feature since no live round can be chambered from a magazine while it is in place since the bolt is not open enough. When training is complete, eject the LT-223 cartridge laser trainer with the included 32-inch push rod. T e rod comes in four 8-inch segments, easily combined to the proper length. MSRP of the LaserLyte® Training Tyme Kit (LT-C556) is $124.95. For more information, visit
www.laserlyte.com
U.S. Marine Peter Palma saw the need for a rifl e cleaning kit that stood up to hard use instead of the crushable kits issued by the military. T e MS Clean kit is made of tough polymer that can be run over by a pickup truck. It’s also smartly designed and shaped like a 30-round AR-15 magazine. T at means it will fi t in the many carriers that your gear is already made to hold, keeping it close at hand whenever needed. However, it cannot be mistakenly inserted into an actual fi rearm. T e kit slides open to access your own cleaning supplies or it can be purchased complete with sectioned rod, brush, chamber brush, rubber coated pick, fi rearm toothbrush, and Froglube®. Available in various colors and in a larger, double-wide size at
www.mscleankits.com.
www.laserlyte.com 4 The Police Marksman Jan-Feb 2014
www.policemarksman.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48