Beauty -Dermabrasion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
abrasion the
bunch
In the early 1990s, microdermabrasion took our industry by storm and has since become a firm salon favourite. Whilst the traditional microdermabrasion market remains buoyant, new techniques such as aquabrading and wet/dry microdermabrasion treatments have now emerged making the salon-based dermabrasion market even more appealing, particularly to those clients who struggle with sensitive skin.
For those of you who are new to microdermabrasion, the term describes the process of removing the top layer of the epidermis with a minimally abrasive system that uses either loose crystals or a crystal-tipped hand-piece.
Prior to the introduction of microdermabrasion systems, dermabrasion treatments (which go deeper into the skin) could only be carried out in a doctor’s office as it was often necessary to administer anaesthetics to help numb the skin prior to treatment.
The arrival of microdermabrasion systems in the salon meant that even more clients were able to access this type of treatment, with the promise of little or no downtime and more affordability for those requiring a course of treatments.
But, it wasn’t just the salon-based therapists that were starting to realise the potential of this lucrative treatment as manufacturers then looked to create microdermabrasion systems that were suitable even for mobile therapists.
“Traditional crystal-based microdermabrasion was effective, exciting, simple and fashionable – it was
58
fun!” remarks David Suzuki, President of Bio-Therapeutic Inc. “Additionally, it allowed for assertive and expeditious results without the supervision of a physician.”
Although extremely effective in performing microdermabrasion treatments, and still in popular use today, the next stage in the microdermabrasion journey saw some manufacturers looking to replace the loose crystal-based systems, in favour of embedded tips.
“One of the first crystal-free ideas was extremely similar to the original crystal version, in that they both worked by way of a closed loop vacuum system. Rather than aspirating crystals loosely through the system (similar to sand blasting) the new concept incorporated abrasion crystals imbedded onto the surface of a small tubular hand-piece,” explains David.
“The operator used the crystal imbedded hand-piece to ‘sand’ the surface of the skin while simultaneously vacuuming up the debris,” he adds.
“By 2005, saline based ‘pressure washer’ type systems entered the market. The concept was very straightforward and logical; spray saline solution on the skin while simultaneously blowing it off with an extremely high level of compressed air,” David comments.
Today, the dermabrasion market has evolved even further to include combination systems which now offer treatments known as wet/dry microdermabrasion.
“Wet/dry microdermabrasion utilises a traditional closed loop vacuum system that is free from cross contamination, allowing for all exfoliated skin and unused fluids to be hygienically vacuumed away.
“Rather than a tubular hand-piece encrusted with crystals, it incorporates a smooth plastic shield that comes in
contact with the skin, creating a gentle application for all skin types. Once the vacuum loop is closed (when it comes in contact with the skin), the skin is gently lifted into the mouth of the hand-piece. There it comes in contact with a flat diamond encrusted exfoliation disk,” David explains.
One of the key selling points of this new generation of systems is that it enables you to include targeted skin care formulations directly within the derrmabrasion treatment itself.
“During a wet/dry microdermabrasion application the operator will use an array of topically applied products along with the device, each designed to address specific objectives. This part of the equation is key as the fluids themselves help create a smoother application, they typically contain a myriad of key ingredients to cool the skin as well as mitigate redness and irritation, and of course target specific skin concerns.
“Fluid formulations that can be used with such devices include Acne, hydrating, brightening, and some variations of foam chemical peels. All abraded skin and used fluids are vacuumed away hygienically, leaving the skin smooth and hydrated,” David adds.
Of course, whatever type of dermabrasion system you decide to include in your business, it’s important to research the market thoroughly to ensure you’re buying a system that addresses both yours and your clients’ needs. So to help you out we’ve made a start for you.
Turn the page to find a selection of some of the latest dermabrasion systems available…
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84