SHOWCASE enter 804
Advertorial
tesa® Lift & Reseal campaign picks up speed
t
Leak-free turbine pumps ideal
for challenging applications
turbine pumps which are an ideal solution for low- flow / high-head applications where zero leakage is required. Available in a wide range of wetted materials the M Pumps range is designed to handle liquids containing up to 20% entrained gas, as well as thin, non-lubricating liquids, or for pumping small flows at high differential pressures. The pumps can handle capacities up to 13m3 /hour at differential heads up to 164 metres for single stage designs and up to 500 metres for multistage pumps. Low NPSH versions are also available for refrigeration / cooling applications, or for pumping boiling liquids or high vapour pressure liquids, with an NPSHR down to 0.5 metres. The metallic designs provide high system pressure capability, 25 Bar on the standard T Mag M metallic series, 150 Bar for high system pressure versions of the T Mag M series and up to 1500 Bar for the T Mag XPM designs.
P
Michael Smith Engineers Ltd Tel: 0800 316 7891 Web:
www.michael-smith-engineers.co.uk
ump specialists MICHAEL SMITH ENGINEERS now offer a range of magnetically-driven regenerative
esa’s new Lift & Reseal initiative is gathering momentum, with some of the
UK’s leading food manufacturers in talks with the company about the benefits of its dynamic resealing tape.
Working closely with packaging and
procurement specialists, the tesacohesion team, with its all-embracing approach to customer service and process improvement, has developed an efficient in-line application called Lift & Reseal, which is already being used by one of the country’s foremost suppliers of snacking products.
In this example, the in-line application
delivers a line of tape running from top to bottom of healthy nut and fruit snack packs, giving consumers the ability to reseal the pack for the lifetime of its contents, with approximately 20 effective resealing actions.
Peter Spencer, tesa’s Specialist Segment
Manager, Manufacturing, comments “Freshness through the ‘life’ of the product is paramount to our customers, who strive to deliver the very highest standards of healthy eating. Convenient packaging solutions have been identified as a key factor in the consumer’s product selection process and tesa is committed to working with customers to ensure they can meet the demand to satisfy their customers.”
For further information on tesa Lift & Reseal visit
www.liftandreseal.co.uk tesa UK Ltd.
Tel: 01908 211333
90% more efficient than Air Conditioning
V
isit us at the Energy Show and see a live demo cooler Stand G20
http://www.theenergyevent.com/ - bring along drawings and we will give
you an idea of energy savings and costs. EcoCooling evaporative cooling can be used as an alternative to air
conditioning in most industrial buildings providing 90% energy savings at a fraction of the capital cost of a traditional air conditioning or ventilation system. A carefully sized ventilation system is designed to maintain a constant flow
of fresh air into the building. During warm periods evaporative cooling is used to cool the air before it enters the building. A simple system of just one unit can provide up to 30kW of cooling from just
1kW of electricity and can cover an area of 250sqm or a 15m diameter circle in a typical manufacturing or logistics operation. Most systems are modular allowing the addition of units as and when required. The only service requirements are 240v electricity and a mains water supply. For more information on how it works see:-
http://www.ecocooling.co.uk/generalcooling/evapcool.php
EcoCooling evaporative coolers offer many Advantages over traditional Systems They are safe, cost effective and require only simple maintenance. Their low power usage has little impact on the site maximum demand and can release power availability if it is used to replace refrigeration. Advanced control systems connect to any existing BMS system and can manage the environment and utilise heat recovery to provide heat in the winter months whilst providing a fresh clean environment all year round. There are no refrigerants and the installation cost can be up to a quarter of the cost of traditional systems. Installation in most cases is quick and entails minimum, if any, disruption to production. EcoCoolers can also provide air flow through the side or top, allowing installation to be flexible and cheaper when roof penetration is not an option.
See our case studies
http://www.ecocooling.co.uk/casestudy/casestudies.php Materials Handling & Logistics SEPTEMBER 2013 S25
Web:
www.tesa.co.uk
enter 805
Legionnaires disease and evaporative coolers EcoCooling evaporative coolers are at the very lowest level of legionella risk and exceed the requirements of UK HSE regulations and controls. The use of wetted media instead of sprays avoids droplets, and since the water circulates at the wet bulb temperature of the air, evaporative cooler water never enters conditions for legionella growth. Other simple process controls such as automatic drainage contribute to a risk level comparable with a standard hot or cold water distribution system. Simple maintenance performed every 6 months maintains hygienic and safe operation.
Ecocooling now have over 1500 installations in the UK including Cummins Diesel, Net-a-Porter, RPC, Cott Beverages, Premier Foods and Borg Warner
sales@ecocooling.org Tel: 01284 810586 For further information and case studies visit our web site at
www.ecocooling.co.uk/generalcooling/index.php
enter 806
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64