Fibre, pico and femto second lasers The StarCut Tube can be powered with ROFIN’s StarFemto FX, StarPico or StarFiber FC laser sources and achieves contour accuracies better than ±5 μm. The femto second laser source provides pulses lengths down to 300 fs and wavelengths of 1030 nm, 515 nm and 343 nm. Pulses shorter than 1 ps are an essential prerequisite for true, cold material processing and distortion-free cutting and drilling of polymers.
The new wet cutting option dramatically reduces the additional efforts, which are characteristic for wet laser cutting processes. The entire water-cooling system has been integrated into the main housing. It was designed with a special focus on easy operation and maintenance. The water tank is easily accessible and removable for water change. A drawer allows to remove finished part without interrupting the cutting process.
Application development, laser solution and training from a single source Optimum laser systems are just one part of the ROFIN philosophy. Medium-sized companies expect way more from their partner than just selling them suitable laser systems. ROFIN’s specialists take care of the employees’ training, help setting up the first applications and the application support provides unbureaucratic assist during the first months. If required, ROFIN even designs the production room according to laser safety standards.
With its various configuration possibilities, service and support from the world-leading laser manufacturer ROFIN, the StarCut Tube emerges as a prospecting solution for fully-automated tube processing in a broad application range.
FEMTOprint
Imagine your 3D micro-device, print it with FEMTOPRINT.
Integrate optical, fluidic, mechanical features in a single substrate
Table top, no need of clean room Rapid and direct, no need of masks Precise and reliable
FEMTOprint SA
Via Industria 1, CH-6933 Muzzano, Tel +41 91 961 64 40, Fax +41 91 961 64 41
info@femtoprint.ch,
www.femtoprint.ch
31 | commercial micro manufacturing international Vol 6 No.5
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52