CASTING INNOVATIONS
Flexible Tumble Blast Design Improves Cleaning Brillion Iron Works, Brillion, Wis.,
a company of Accuride Corp., Evans- ville, Ind., has experienced considerable growth over the last few years. Its more than 100-year-old facility currently pro- duces 140,000 net tons of gray, ductile and austempered ductile iron annually for a wide variety of industries. With growth comes the need
for equipment improvements and upgraded technology to maximize production. Its finishing room had a need for speed, and Brillion project engineer Jim Knuth brought in Met- cast Blast Cleaning Technologies to join his planning efforts. “Our foundry is primarily a job
shop, which requires flexibility when it comes to cleaning castings,” said Knuth. “When the opportunity arose to make this investment for shot blast equipment, we had an unbelievably tight timeframe and very tight footprint with headroom constraints. We were also looking for someone to not only work with us, but partner with us to think outside the box of your typical shot blast designs. We needed a design that would minimize the complexity of our layout while
improving the productivity and clean- ing of our castings.” Brillion produces everything from
lightweight, intricate, thin-walled iron castings to highly cored, heavy- sectioned parts. Te Metcast M-34s offered a flexible tumble blast design that can handle the company’s range of castings and configurations. Te machines include dual blast
e-Wheels, improved abrasive control valves, abrasion-resistant steel bucket elevators, a magnetic separation system mounted on the floor, and cast man- ganese flight and link assemblies. Tese M-34s are designed to be much more rugged than traditional 34s, with heavier liner sections and load door as well as more access to the machine’s internal components, with larger access doors for maintenance personnel. Other durable features of the
standard M-34 include an abrasion- resistant lower hopper and screw trough, a 1-in. manganese roof plate and kick plate requiring no additional liners, and a severe duty mill. Te air plenum includes an abrasion-resistant baffle plate exclusive to the M-Series.
Te M-34 has a shaft-mounted 3HP gear motor and high alloy, cast and flame-hardened drive sprockets and traction wheels for extended life. Flame hardened plow bolts average 55 Rc hardness for durability. With an improved top door and side seal ar- rangement, the machine is designed to retain the abrasive inside the blast. “Te Magnetic Separation System has definitely gotten our attention in the last four months. After 500 hours of operation, the blades show very minimal wear, and we expect to see over 1,000 hours in blade life,” said Knuth. “We attribute this to the design and improved functionality of this sys- tem as well as the new e-Wheel tech- nology we installed. Our productivity has doubled, cutting blast cycle times by 50% when compared to our older 34 tumble blasts. Te surface finish of our castings has improved as well.” Te M-34s are loaded and unloaded using a General Kinematics traveling feeder conveyor, and two-way unload conveyors feed three process conveyors
for final grinding and inspection. For more information, visit
www.metcastservice.com.
Brillion Iron Works project engineer Jim Knuth cites Metcast Blast Cleaning Technologies training, design and engineering as keys to supporting the facility’s new, custom built system.
42 | MODERN CASTING June 2013
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60