TOP HONORS
A Neighborhood Beacon Copper-clad fi re station connects with the community By Marcy Marro, Managing Editor
Located at the base of historic Mt. Baker Boulevard in Seattle, Fire Station 30 serves as an anchor to the community. Its civic scale marks the transition between the commercial activity of Rainier Avenue and the primarily residential Mt. Baker neighbor- hood. Completed in April 2011, the 9,120-square- foot, two-story fi re station was designed by Seattle- based Schacht Aslani Architects.
Accommodating both the work regimen and hu-
man comfort needs of the fi refi ghters, the station’s compact plan and simple building form optimizes its operational effi ciency. The station’s rooms are set up to support a place for fi refi ghters to work, relax, rebound and enjoy the camaraderie of station life. “The design explores program relationships
that drive a compact footprint and create clarity to circulation within the building,” says Eric Aman, AIA, LEED AP, project manager at Schacht Aslani Architects. “By stacking the living quarters or ‘house side’ this allows the building to meet the requirements of a very tight site while enhancing the overall scale. Ultimately this balance provides a strong civic presence to the neighborhood.” Wrapped in a folded plane of copper skin, the
station’s program is revealed through a series of pulls and reliefs in this fabric. To create civic identity and a clear public presence, the station’s opaque apparatus bay doors within the transparent curtain- wall from Norcross, Ga.-based Kawneer Co. Inc., are juxtaposed with the fritted station signage. Its highly
transparent street façade allows passer-bys to view the activity within, while at night, the illuminated building becomes a beacon of the department’s pres- ence within and its commitment to the community. “This allows the transparent street face to
reveal the program elements to the public in a very open and intentional fashion,” explains Aman. “On the south and west sides, the fabric is pulled or ripped away to create openings and windows that provide daylight, and views into and from select rooms. These tears in the fabric reinforce the story to the public on how the building functions.” The copper siding extends outward on the
west side to create an overhang to shade the living quarters, while on the north and south elevations, a combination of exterior overhang and interior light shelves are used to shade and bounce light. Fire Station 30 features 2,025 square feet
of Bristol, Conn.-based Morin Corp.’s 16-ounce, C-29-7/8-inch horizontal corrugated copper panels and 2,875 square feet of select seam narrow bat- ten standing seam copper panels from Fontana, Calif.-based AEP Span. The soffi ts and fascia are made up of 1,068 square feet of Northclad AL painted aluminum panels from Northshore Sheet Metal Inc., Everett, Wash., with a Fluropon Classic II Medium Bronze coating from Artisan Finishing Systems Inc., Maysville, Wash. While more traditional materials were explored,
due to its location in a liquefaction zone of poor soils, the project required a lighter-skinned structure that was placed atop an elevated structural slab supported by an auger-cast pile system. Copper
48 METAL ARCHITECTURE December 2012
www.metalarchitecture.com
also provides a contextual tie-in with the adjacent Franklin High School, Aman says. The LEED Gold certifi ed station features a geo-
thermal heat pump system that provides energy- effi cient heating and cooling, while materials were selected based on their sustainability in terms of content, cost and maintenance requirements, says Aman. Additionally, the roof collects rainwater and directs it to a bioswale on the site’s west side.
Fire Station 30, Seattle
Awards: 2012 Copper Development Association Copper in Architecture Award and 2011 Seattle Design Commission Award for Design Excellence
Owner: City of Seattle Architect: Schacht Aslani Architects, Seattle
General contractor: Synergy Construction Inc., Woodinville, Wash.
Glazing contractor: Pacifi c Northwest Contractors Inc., Lakewood, Wash.
Metal wall panel fabricator/installer: Northshore Sheet Metal Inc., Everett, Wash.
Metal wall panels: AEP Span, Fontana, Calif.,
www.aepspan.com, Circle #75 and Morin Corp., a Kingspan Group Company, Bristol, Conn.,
www.morincorp.com, Circle #76
Coating: Artisan Finishing Systems Inc., Maysville, Wash.,
www.artisanfi
nishingsystems.com, Circle #77
Curtainwall: Kawneer Co. Inc., Norcross, Ga.,
www.kawneer.com, Circle #78
Skylights: Sunoptics Prismatic Skylights, Sacramento, Calif.,
www.sunoptics.com, Circle #79
Mike Jensen
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52