64


nanotimes News in Brief


terials, yielding novel artificial materials that do not exist in nature,” Lee said. “This ‘epitaxy‘ technique can be used to design entirely new materials or to specifically modify the composition of thin-film crystals with sub-nanometer accuracy.”


While band gap tuning has been widely successful for more conventional semiconductors, the 30% band gap reduction demonstrated with oxides easily surpasses previous accomplishments of 6% – or 0.2 electron volt – in this area and opens pathways to new approaches to controlling band gap in com- plex-oxide materials.


With this discovery, the potential exists for oxides with band gaps to be continuously controlled over 1 electron volt by site-specific alloying developed by the ORNL team. “Therefore,” Lee said, “this work represents a major achievement using complex oxides that offer a number of advantages as they are very stable under extreme and severe environ- ments.”


Woo Seok Choi, Matthew F. Chisholm, David J. Singh, Taekjib Choi, Gerald E. Jellison Jr. & Ho Nyung Lee: Wide bandgap tunability in complex transition metal oxides by site-specific substitution, In: Nature Communi- cations, Vol. 3(2012), February 21, 2012, Article number 689, DOI:10.1038/ncomms1690: http://dx.doi.org/10.1038/ncomms1690


12-02 :: February/March 2012


In this photo, a transmission electron microscope image, taken at a magnification 330000x , shows the nano-sized apex of a silicon carbide tip. © IBM


Scientists at the University of Pennsylvania, the University of Wisconsin-Madison and IBM Re- search - Zurich (NYSE: IBM) have fabricated an ultrasharp silicon carbide tip possessing such high strength that it is thousands of times more wear- resistant at the nanoscale than previous designs. The new tip, which is 100,000 times smaller than the tip of a pencil, represents an important step towards nanomanufacturing for applications, in- cluding bio sensors for healthcare and the environ- ment. The search for hard materials to extend the working life of sharp tools is an age-old problem that started with the first chisels used in stone carving. Even- tually iron was discovered and steel tools revolu- tionized the era. Today, the challenge remains the same, but on a much smaller scale – the need for a nano-sized tip that is both ultrasharp, yet still physically robust, particularly under extreme tempe- ratures and harsh chemical environments.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89