PRODUCTS & SERVICES Telephone: 020 7880 6206 Email:
darren.hale@redactive.co.uk
Hygromatik Vortexstream reducing absorption distance To tackle restrictive long absorption distances in the air handling unit, HygroMatik has introduced VortexSteam. Insufficient absorption can result in contamination risks while long ducts can take up too much space. VortexSteam addresses this issue by significantly shortening the absorption distance while maintaining optimum hygiene and performance. This is achieved by placing the VortexSteam module in front of a steam manifold, which spins the air, mixing air and steam to shorten the absorption distance by up to 5%. l For more information call 02380 443127 or visit
www.hygromatik.co.uk
Ecomesh Adiabatic air inlet cooling Improving the performance of Air Cooled Chillers, Dry Coolers and Condensers and Refrigeration Plants, EcoMESH is a unique mesh and water spray system that improves performance, reduces energy consumption, eliminates high ambient problems, is virtually maintenance- free and can payback in one cooling season. Why should you install EcoMESH? Reduced running cost; reduced maintenance; easy retrofit; improved reliability; increased capacity; self-cleaning filter; shading benefit; no water treatment; and a longer compressor life. l For more information call 01733 244224 or visit
www.ecomesh.eu
KNX provides lighting control solution for the City When financial services firm UBS took space in Broadgate West in the City of London, the company found that the ‘Lightrak’ KNX lighting control system from KNX UK member Electrak was already installed as part of the building’s Cat A fit-out. Lightrak KNX is designed to provide seamless interoperability with any KNX building control modules. These can be added to the system on a simple ‘plug and play’ basis. Any trained integrator can then integrate them by plugging in a laptop anywhere on the system. l For more information call 0845 869 5908 or visit
www.knxuk.org
BACnet natural ventilation control from TITAN Products now available The CCM-204-NV provides energy-efficient control in buildings by monitoring the natural ventilation on demand and improving the environmental conditions through the control of temperature and CO2 levels. The CCM-204-NV can control two separate zones and, when used in conjunction with TITAN Products’ temperature sensors, CO2 sensors, rain detectors and window controllers, the CCM-204-NV can create an extremely flexible multi-zone natural ventilation system. This advanced application-specific controller with automatic seasonal adjustment will increase ventilation as CO2 and temperature levels increase. l For more information call 0161 406 6480 or visit
www.titanproducts.com
Watts Industries keeps cottages’ water hot with Microflex Seven recently completed luxury holiday cottages in the grounds of a 12th century Cistercian priory in North Yorkshire have a 21st century pre- insulated flexible plumbing solution from Watts Industries to ensure that hot water for guests is immediately available and piping hot at all times. Lightweight Microflex PE-Xa multi-core pipes in HD-PE outer jackets were chosen for their energy efficiency and easy-to-lay flexibility, and installed at Syningthwaite Priory, near Wetherby, in an underground ring circuit connecting the cottages to a central plant room. l For more information call 01386 446997 or visit
www.microflexuk.co.uk
46 CIBSE Journal August 2011
Panasonic helps speed up heat pump specification Panasonic has launched its new Aquarea Designer software for contractors taking advantage of today’s strong interest in heat pump installation. The package will allow HVAC designers, installers and distributors to identify the correct heat pump for a particular application from Panasonic’s Aquarea range, to calculate the savings compared to other heat sources and very quickly calculate CO2 emissions. Marc Diaz of Panasonic said: ‘We have designed this new software to be simple and of real benefit to busy engineers.’ l For more information visit
www.panasonicProClub.com
CP provides control for new education centre of excellence CP Electronics has installed controls at the newly refurbished Worcester Royal Infirmary building, which now forms part of the University of Worcester. The brief was to provide accurate and easy adjustment of light levels, something vital for today’s places of learning. Various products from CP were used to control illumination levels in corridors, lecture areas, corridors and WCs. These include the passive infrared detector EBDSPIR-PRM, which can be set for absence or presence detection, switching the load on or off after a preset time. l For more information call 0333 9000671 or email
enquiry@cpelectronics.co.uk
www.cibsejournal.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56