BUSINESS RESOURCES + TOOLS | TOOL CRIB |
‘Mini’ diamond drill with keyless chuck
END 712 P “mini” diamond drill has a “click and go” keyless chuck system allowing bits to be changed quickly and easily. Drills dowel, anchor and thru holes in tile, natural stone and concrete. Variable speed; 0-8000 RPM for easy starting and fast drilling without shock or hammering and eliminates cracks and blow-out. Drills precise holes, even in hard ceramic “gres” tiles and granite. Ideal for countertops, plumbing and other masonry applications. Special water-cooled diamond bits drill 5/32" to 3/4" dia. holes and have a long life of 50 to 100 holes for most applications. Drill has a built-in water swivel with hose connection and valve. A depth gauge allows drilling blind holes for anchors, etc. The motor is 6.3 amps and has a built-in shock protection. Optional centering aids allow precise drilling and includes a connection for a vacuum cleaner.
26
Strike-free wrenches
Strike-free wrenches for heavy- duty applications where striking-face box wrenches cannot be used and where cheater bars should not be used.
Head joint and heritage blades
Head joint blades and heritage blades offering more controlled cuts and exceptional precision for mortar removal on vertical joints and very narrow mortar joints. The blades are available as aftermarket accessories for its AS170 Brick and Mortar saw. The new head joint blades are ideal for cleaning out vertical mortar joints. While the use of conventional diamond blades can easily result in over-cutting and damage to the surrounding brick work, the head joint blades clean out the complete joint without any damage to surrounding bricks. A shortened blade offers exceptional precision and is extremely easy to control, even when the user starts cuts in hard
mortar. The cutting depth is 3 1
/8-inch deep and the cutting width is 1
/4-inch wide. ARBORTECH. e Circle 41 on reader reply
Presented by
TOOL OF THE MONTH
CS UNITEC e Circle 40 on reader reply
Specifically designed for use where false blows are not permitted; also loosen and tighten large fasteners in confined areas where there is not enough room to swing a striking tool. The U.S.-made and available in 2- and 3-foot handle sizes, with 12-point wrench openings ranging in 17 sizes from 1" to 2". Professional-grade and manufactured for high strength, durability and reliability. WRIGHT TOOL.
e Circle 42 on reader reply ClampSaw™ kit
The 12 Volt MAX Compact Lithium ClampSaw Kit (PCL120CRC-2) is a unique, compact and lightweight saw for applications not accessible with large reciprocating saws. Includes a distinctive clamping shoe that holds small diameter objects for fast and accurate cuts. PORTER-CABLE.
e Circle 44 on reader reply
Ring cutter
Saf-T-Kut is a fast, easy way to remove brass compression rings and ferrules when removing old, existing water shut-offs and angle stops. Simply “splits” the brass ring or ferrule, saving time and frustration. The concern of getting stuck or
“mushrooming” and damaging the copper pipe is finally eliminated. Works on all 1/2" copper stub-outs. SAF-T-KUT.
e Circle 43 on reader reply
phc february 2011
www.phcnews.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68