This page contains a Flash digital edition of a book.
Transactions, vol. 115, pp. 761-766 (2007).


47. Fasoyinu, Y., Sahoo, M., Sikorski, S., “Hot Tearing of Aluminum Alloys 206 and 535 Poured in Metal Mold,” Proceedings of the AFS 6th International Conference on Permanent Mold Casting of Aluminum and Magnesium, pp. 11-25 (2008).


48. Hall, H. F., “The Strength and Ductility of Cast Steel during Cooling from the Liquid State in Sand Mold,” Journal of the Iron and Steel Institute, vol. 15, pp. 65- 93 (1936).


49. Singer, A. R. E., Jennings, P. H., “Hot-Shortness of the Aluminium-1043 Silicon Alloys of Commercial Purity,” J. Inst. Metals, vol. 72, pp. 197-211 (1946).


50. Oya, S., Hanma, U., Fujii, J., Othaki, M., “Evaluation of Hot Tearing in Binary Al-Si Alloy Castings,” Aluminium, vol. 60, no. 20, p. 777 (1984).


51. Paray, F., Kulunk, B., Gruzleski, J. E., “Hot Tearing in 319 Alloy,” Int. J. Cast Metals Res., vol. 13, pp. 147- 159 (2000).


52. Gamber, E. J., “Hot Cracking Test for Light Metal Casting Alloys,” AFS Transactions, vol. 67, pp. 237- 241 (1959).


53. Singer, A. R. E., Jennings, P. H., “Properties of the Al-Si Alloys at Temperatures in the Region of the Solidus,” J. Inst. Metals, vol. 73, p. 33 (1947).


54. Langlais, J., Gruzleski, J. E., “A Novel Approach to Assessing the Hot Tearing Susceptibility of Aluminum Alloy,” Materials Science Forum, vol. 331-337, pp. 167-172 (2000).


55. Hamaker, J. C., Wood, W. P., “Influence of Phosphorus on Hot Tear Resistance of Plain and Alloy Gray Iron,” AFS Transactions, vol. 60, pp. 501-510 (1952).


56. Guven, Y. F., Hunt, J. D., “Hot-Tearing in Aluminum Copper Alloys,” Cast Metals, vol. 1, no. 2, pp. 104- 111 (1988).


57. Taumura, H., Kato, N., Ochiai, S., Katagiri, Y., “Cracking Study of Aluminum Alloys by the Variable Tensile Strain Hot Cracking Test,” Trans. Jpn. Welding Soc., vol. 8, no. 2, pp. 63-69 (1977).


58. Instone, S., StJohn, D., Grandfield, J., “New Apparatus for Characterizing Tensile Strength Development and Hot Cracking in the Mushy Zone,” International Journal of Cast Metals Research, vol. 12, no. 6, pp. 441-456 (2000).


59. Viano, D., St.John, D., Grandfield, J., Cáceres, C., “Hot Tearing in Aluminium-Copper Alloys,” Light Metal (2005).


60. Eskine, D., Zuidema, J., Jr., Katgerman, L., “Linear Solidification Contraction of Binary and Commercial Aluminium Alloys,” International Journal of Cast Metals Research, vol. 14, pp. 217-224 (2002).


61. Eskin, D. G., Suyitno, Mooney J.F., Katgerman, L., “Contraction of Aluminum Alloys during and After Solidification,” Metallurgical and Materials Transactions A, vol. 35, pp. 1325-1335 (2004). 62. Stangeland, A., Mo, A., Dielsen, Ø., Eskin, D.,


International Journal of Metalcasting/Winter 11


Mhamdi, M., “Development of Thermal Strain in the Coherent Mushy Zone during Solidification of Aluminum Alloys,” Metallurgical and Materials Transactions A, vol. 35, p. 2903 (2004).


63. Cao, G., Kou, S., “Hot Tearing of Ternary mg-Al- Ca Alloy Castings,” Metallurgical and Materials Transactions A, vol. 37A, p. 3647 (2006).


64. Zhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O., Kainer, K. U., “Quantitative Determination on Hot Tearing in mg-Al Binary Alloys,” Materials Science Forum, vol. 618-619, pp. 533-540 (2009).


65. Eskin, D. G., Katgerman, L., “A Quest for a New Hot Tearing Criterion,” Metallurgical and Materials Transactions A, vol. 38, pp. 1511-1519 (2007).


66. Suyitno, Kool, W. H., Katgerman, L., “Hot Tearing Criteria Evaluation for Direct-Chill Casting of an Al-4.5 Pct Cu Alloy,” Metallurgical and Materials Transactions A, vol. 36A, pp. 1537-1546 (2005).


67. Suyitno, Kool, W. H., Katgerman, L., “Evaluation of Mechanical and Non-Mechanical Hot Tearing Criteria for DC Casting of an Aluminum Alloy,” Light Metals, pp. 753-758 (2003).


68. Dickhaus, C. H., Ohm, L., Engler, S., “Mechanical Properties of Solidifying Shell of Aluminum Alloys,” AFS Transactions, vol. 101, pp. 677 (1994).


69. Lahaie, D. J., Bounchard, M., “Physical Modeling of the Deformation Mechanisms of Semisolid Bodies and a Mechanical Criterion for Hot Tearing,” Metallurgical and Materials Transactions B, vol. 32, p. 697 (2001).


70. Williams, J. A., Singer, A. R. E., “Deformation, Strength, and Fracture Above the Solidus Temperature,” J. Inst. Met., vol. 96, pp. 5-12 (1968).


71. Zhao, L. Y., Baoyin, Wang, N., Sahajwalla, V., Pehlke, R. D., “The Rheological Properties and Hot Tearing Behavior of an Al-Cu Alloy,” International Journal of Cast Metals Research, vol. 13, no. 3, pp. 167-174 (2000).


72. Magnin, B., Maenner, L., Katgerman, L., Engler, S., “Ductility and Theology of an Al-4.5%Cu Alloy from Room Temperature to Coherency Temperature,” Mater Science Forum, vol. 1209, pp. 217-222 (1996).


73. Prokhorov, N. N., “Resistance to Hot Tearing of Cast Metals during Solidification,” Russian Castings Production, vol. 2, pp. 172-175 (1962).


74. Braccini, M., Martin, C. L., Suéry, M., Bréchet, Y., “Modeling of Casting,” Welding and Advanced Solidification Processes IX, pp.18-24 (2000).


75. M’Hamdi, M., Mo, A., Fjær, H. G., TearSim, “A Two-Phase Model Addressing Hot Tearing Formation during Aluminum Direct Chill Casting,” Metallurgical and Materials Transactions A, vol. 37, pp. 3069-3083 (2006).


76. Clyne, T.W., Davies, G. J., “Solidification and Casting of Metals,” pp. 275-278 (1979).


77. Katgerman, L., “A Mathematical Model for Hot Cracking of Aluminum Alloys during DC Casting,” J. of Metals, vol. 34, pp. 46-49 (1982)


37


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87