This page contains a Flash digital edition of a book.
Transactions, vol. 65, pp. 247-258 (1957).


17. Davidson, C., Viano, D., Lu, L., Stjohn, D., “Observation of Crack Initiation during Hot Tearing,” International Journal of Cast Metals Research, vol. 19, pp. 59-65 (2006).


18. Saveiko, V. N., “Theory of Hot Tearing,” Russian Castings Production, vol. 11, pp. 453-456 (1961).


19. Rosenberg, R. A., Flemings, M. C., Taylor, H. F., “Nonferrous Binary Alloys Hot Tearing,” AFS Transactions, vol. 69, pp. 518-528 (1960).


20. Clyne, T. W., Davies, G. J., “A Quantitative Solidification Test for Casting and an Evaluation of Cracking in Aluminium-Magnesium Alloys,” The British Foundrymen, vol. 68, pp. 238-244 (1975).


21. Pumphrey, W. I., Lyons, J. V., “Cracking during the Casting and Welding of the More Common Binary Aluminum Alloys,” J. Inst. Met., vol. 118, pp. 439-455 (1948).


22. Upadhya, G., Cheng, S., Chandra, U., “A Mathematical Model for Prediction of Hot Tears in Castings,” Light Metals, pp. 1101-1106 (1995).


23. Chamberlain, B., Watanabe, S., “A Natural Aging Aluminum Alloy, Designed for Permanent Mold Use,” AFS Transactions, vol. 85, pp. 133-142 (1977).


24. Sigworth, G. K., Rios, O., Howell, J., Kaufman, M., “Development Program on Natural Aging Alloys,” AFS Transactions, vol. 112, pp. 387-408 (2004).


25. Dodd, R. A., Pollard, W. A., Meier, J. W., “Hot Tearing of Magnesium Casting Alloys,” AFS Transactions, vol. 65, pp. 100-118 (1957).


26. Pekguleryuz, M. O., Vermette, P., “A Study on Hot- Tear Resistance of Magnesium Diecasting Alloys,” AFS Transactions, vol. 114, pp. 729-736 (2006).


27. Spittle, J. A., Cushway, A. A., “Influence of Superheat and Grain Structure on Hot-Tearing Susceptibilities of Al-Cu Alloy Castings,” Metals Technology, vol. 10, no. 1, pp. 6-13 (1983).


28. Sadayappan, M., Sahoo, M., Shkuka, M., Yang, B. J., Smith, R. W., “Effect of Melt Processing and Magnetic Field on the Hot Tearing of Al-Cu Alloy A201,” AFS Transactions, vol. 110, pp. 407-415 (2002).


29. Easton, M., Grandfield, J., StJohn, D., Rinderer, B., “The Effect of Grain Refinement and Cooling Rate on the Hot Tearing of Wrought Aluminum Alloys,” Materials Science Forum, vol. 30, pp. 1675-1680 (2006).


30. Easton, M., Wang, H., Grandfield, J., StJohn, D., Sweet, E., “An Analysis of the Effect of Grain Refinement on the Hot Tearing of Aluminum Alloys,” Materials Science Forum, vol. 28, pp. 224-229 (2004).


31. Lin, S., Aliravci, C., Pekguleryuz, M. O., “Hot-Tear Susceptibility of Aluminum Wrought Alloys and the Effect of Grain Refining,” Metallurgical and Materials Transactions A, vol. 38, pp. 1056-1068 (2007).


32. D’Elia, F., Ravindran, C., “Effect of Ti-B Grain Refiner on Hot Tearing in Permanent Mold Cast B206 Aluminum Alloy,” AFS Transactions, vol. 117, pp.


36


139-148 (2009).


33. Matsuda, F., Nakata, K., Shimokusu, Y., “Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-mg (Report I),” Transactions of Japanese Welding Research Institute,” vol. 12, no. 1, pp. 81-87 (1983).


34. Spencer, D. B., Mehrabian, R., Flemings, M. C., “Rheological Behavior of Sn-15 Pct Pb in the Crystallization Range”, Metallurgical & Materials Transactions B, vol. 3, no. 7, pp. 1925-1932 (1972).


35. Rodriguez, A., Chavez, R., Hernandez, J., Raymond, Y., Major, F. J., “Casting Trials for a Modified 206 Aluminum Alloy that Approaches the Strength of Ductile Iron without Hot Cracking Produced Encouraging Results,” Modern Casting, vol. 100, No. 1, pp. 42-44 (2010).


36. Fasoyinu, F. A., Sadayappan, M., Cousineau, D., Sahoo, M., “Effect of Grain Refinement on the Hot Tear Resistance and Shrinkage Characteristics of Permanent Mold Cast Yellow Brass (C85800),” AFS Transactions, vol. 106, 327-338 (1998).


37. Warrington, D., McCartney, D. G., “Hot-Cracking in Aluminum Alloys 7050 and 7010 – a Comparative Study,” Cast Metals, vol. 3, no. 4, pp. 202-208 (1991).


38. Rappaz, M., Drezet, J.-M., Gremaud, M., “A New Hot Tearing Criterion,” Metallurgical and Materials Transactions A, vol. 30, no. 2, pp. 449-455 (1999).


39. Grandfield, J. F., Davidson, C. J., Taylor, J. A., “The Columnar to Equiaxed Transition in Horizontal Direct Chill Cast Magnesium Alloy AZ91,” Light Metals, 911-917 (2001).


40. Singer, K., Benek, H., “Contribution to Hot Tears in Steel Castings,” Stahl and Sisen, vol. 51, pp. 61-65 (1931).


41. Bichler, L., Elsayed, A., Lee, K., Ravindran, C., “Influence of Mold and Pouring Temperatures on Hot Tearing Susceptibility of AZ91D Magnesium Alloy,” International Journal of Metalcasting, vol. 2, no. 1, pp. 43-54 (2008).


42. Couture, A., Edwards, J. O., “The Hot-Tearing of Copper-Base Casting Alloys,” AFS Transactions, vol. 74, pp. 709-721 (1966).


43. Lin, S., A Study of Hot Tearing in Wrought Aluminum Alloys, Ph.D. ed., University of Québec in Chicoutimi, Chicoutimi, PQ, Canada (1999).


44. Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N., Kainer, K. U., “Investigations on Hot Tearing of mg-Al Binary Alloys by Using a New Quantitative Method,” Magnesium Technology (2009).


45. Limmaneevichitr, C., Saisiang, A., Chanpum, S., “The Role of Grain Refinement on Hot Crack Susceptibility of Aluminum Alloy Permanent Mold Castings,” Proceedings of the 65th World Foundry Congress (2002).


46. Sadayappan, M., Sahoo, M., Weiss, D., “Evaluation of the Hot Tear Susceptibility of Selected Magnesium Casting Alloys in Permanent Molds,” AFS


International Journal of Metalcasting/Winter 11


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87