This page contains a Flash digital edition of a book.
All about oil Auto Talk


technician for routine oil changes. We trust service providers to use the right oil—because, let’s face it, many of us can’t tell the difference between 10W-30 and Cheez Whiz. Here’s a quick guide to what all those numbers mean.


D


API codes The first thing to look for on an oil bottle is whether it’s for a gasoline or diesel engine, or okay for both. There will be some wording start- ing with “API.” This is the American Petroleum Institute rating. A code starting with S means the oil is for gasoline engines; C means diesel. The second letter in each code indicates the level of protection. Each time the automotive industry upgrades its specifications for oil additives, the latest oil type is desig- nated as the next letter of the alpha- bet. So, for example, SB is an older version than SC. You don’t have to choose an older version for an older car—“API SJ” means that the oil can be used in gasoline engines with any rating requirement from A through J.


SAE rating numbers 10W-50, 5W-30 … these are the numbers most people notice on an oil bottle. They indicate the oil’s viscosity (how thick it is). The lower the number, the thinner the oil. Oil with a rating of 10 is thinner and flows more easily than one with a rating of 30. Oil gets thicker in cold weather


and thinner when it’s hot. Picture the difference between solid and liquid honey, and the amount of effort it takes to spread each. If the oil is too thick, the engine might not work. If it’s too thin, it may not provide enough protection.


52 EnCompass January/February 2011


o you change your own oil? These days, most people take their vehicle to a


Oils with two different numbers


in their rating are called multigrade oils. These show the different vis- cosity of the oil under hot and cold conditions. The W means winter, or cold weather. So, SAE 10W-30 means this oil is a 10 when it’s cold and a 30 when it’s hot. The SAE just stands for Society of Automotive Engineers.


Detergent oils If you see a bottle of oil touting its detergent content, there’s no reason to choose it over another brand. The truth is that all multigrade oils are detergent oils. Some brands use this as a selling point, but it’s similar to bottled water promoting the fact that it’s non-fat. And it’s a myth that detergent oils cannot be used in older vehicles—they can and should be used in any vehicle that has an oil filter.


Synthetic or standard Synthetic oils are thinner than stan- dard oils. This means they provide better lubrication, but also leak or


www.AAA.com


burn a little easier. If your engine is old and worn with existing leaks, you may want to choose a standard oil instead, but in general you can use standard or synthetic inter- changeably in most vehicles. n


SAE 10W-30 means this oil is a


when it’s cold and a


10 when it’s hot. 30


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56