INSTALLATION NEWS


Substantial savings for Claridges


Bow bells ring for regeneration


Birmingham building services provider JS Wright is to play a major role in London’s regeneration by fitting out a new £4.5-million mixed-use development in Bow. The Aston-based company will be working with leading housing group Galliford Try in designing and installing all the mechanical services for 34 Bow Common Lane, a six- storey building being constructed on the site of a former car repair workshop. The property will have 31 high quality apartments split between shared ownership and affordable homes managed by Swan Housing Group, along with commercial space on the ground floor and a communal roof garden.


JS Wright will begin work on site in November 2010 installing individual energy efficient condensing gas boilers for radiator heating in each of the apartments. The firm will also be fitting an energy saving whole house heat recovery ventilation system that will replace stale moist air with fresh warmed air from outside. The £300,000 contract will also include providing boosted cold water services, a gas distribution system, and above-ground soil and waste services.


Elizabeth Ellis, Design and Build Co-ordinator for Galliford Try, said: “We chose JS Wright because of our successful previous experience of working with them to deliver residential schemes to a high-quality standard on time and within budget.” Marcus Aniol, JS Wright Managing Director, said: “We are delighted to be able to contribute towards the development of a thriving local community within a modern environmentally friendly building in a major regeneration area of the capital.”


Luxury hotel Claridges in London is benefiting from a 30% reduction in energy costs after the installation of two 11kW ABB variable speed drives (VSDs) to control air supply and extraction in its kitchen.


The VSDs were installed by ventilation control system specialist Food Industry Technical (FIT) to lower energy costs and reduce CO2 output as part of the hotel’s total kitchen refit. The upgrade will see total energy savings of over £10,000 per year. FIT supplied a cooker hood system that automatically reacts to conditions in the kitchen, ramping up extraction during busy times and reducing flow in quieter times. By controlling the extraction and supply fans to match the needs of the application, significant energy savings are achieved.


Previously the cooker hood system was consuming over 450kWh per day, but after the installation of FIT’s system incorporating ABB drives, energy consumption fell to 315kWh per day. The installation will save the hotel just under 50 tonnes of CO2 per year and achieve return on investment in 1.8 years. The fans were running at 100% at all times prior to the installation of the FIT system. However this method wastes energy, and using VSDs to control fan speed brings more accurate control and uses less energy. VSDs match the speed of the fan to the demands of the application so just enough energy is supplied to extract and supply fans at all times, saving money. FIT installed its Cheetah cooker hood extraction system into the kitchen. At the heart of the system are two 11kW, IP54 ABB standard drives for HVAC controlling the extraction and supply fans. The system incorporates a range of sensors measuring temperature, smoke, steam and airflow in the extract and supply ducts in order to determine the fans optimum flow rates, enabling conditions in the kitchen to remain constant at all times. To enhance safety the system also incorporates a gas isolation module for cutting off the gas supply in case of emergencies. “The sensors measure activity in the kitchen and constantly send signals to the drives adjusting the fans to meet demand,” says Peter Evans, Sales Director for FIT. “As a safety measure, the system also monitors flow in the exhaust duct and supply duct. If the extract or supply duct loses air supply, the gas isolation module automatically shuts down the gas supply, ensuring that gas levels do not build up in the kitchen.”


The system also features a fail safe mechanism to further enhance safety – in the event of a control cable being severed, or a sensor failing, the drives will automatically ramp up to 100% and stay there until the fault is rectified, ensuring air supply to the kitchens remains at safe levels.


“The installation represented a huge challenge,” adds Evans.


“We had six hours to fit our system before the kitchen opened up to customers. Using ABB drives here offered a significant advantage as the drives are extremely easy to configure because the built-in keypad tells you exactly what parameters you are setting without having to reference them. With competitor models, the drives have numbers that represent each parameter and the engineer has to refer to an instruction manual to see what the numbers mean, resulting in a significantly increased installation time.”


“With the introduction of the 17th edition of the new Building Regulations (Part F & L), variable speed drives are now mandatory for the control of extraction fans,” says Gary Busby, Sales Engineer for ABB drives. “Claridges will benefit from a considerable reduction in energy costs whilst making a contribution to cutting their CO2 output – a legal requirement under the new Carbon Reduction Commitment (CRC) Energy Efficiency Scheme.”


VISIT OUR WEBSITE: www.bsee.co.uk


FOR MORE INFORMATION TEXT EJ14 FREE TO 62244


NOVEMBER 2010 BUILDING SERVICES & ENVIRONMENTAL ENGINEER 15


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44