#16- A few passes with the white and #18- Hard to see the white through the #19- Now I’ll add some red/ blue mixture
I’ve built up a shiny, smooth looking red in this photo, but it’s still there. The to create my darker -shadow area on the
glove. This is the base which I’ll build off highlights are still visible in this my mid- glove.
of. I’ll add some stitching and it’s ready dle grade of red.
for some red.
#20- Masked off the Glove and onto it’s #21- For Woody’s jacket a light spray #24- Now onto the other glove, which I
onto Woody’s blue body. Same as before, of blue, followed up by mixing blue with could have done at the same time as the
I’ll go over the area with white so my candy blue and black. first, but for the purpose of this demo I’ll
color comes through. do them one at a time.
#26- At this point I have about seven #27- I finish off his mouth and remove #28- I mask Woody again so I don’t get
hours into the drawing, prepping and all the masking to get a good look at any over spray on him while finishing up
painting. I took off Woody’s mask so I Woody. I lightly drawn in the hole that the project. After basing the back ground
could see how things are looking. This
woody will have popping out of.
white I whipped up a mixture of white, yel-
is my break and a good time to review low and orange for the background color.
what I’ve done so far. At this point I’ll The wood grain is a red and black mix;
go back in and darken what needs to be darker at the bottom and lighter as it goes
pushed back and highlight what needs to up. To highlight the outer edge of the hole I
be pulled forward. quickly threw some white against it.
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32