With brush and dark green, I place the island palms. To add more depth to the painting I render very light and small clouds
depth to the island, I alternatively use my brush and my airbrush around the skyline and larger clouds up in the sky.
to create layers of vegetation. I’ve started with dark green and Notice I’ve protected my parrot with transfer paper up to this
shaded it with a darker green. I come back over it with white point. With dark transparent blue Auto-Air, I start to build my
color to add new palms, and then I spray light green on the new wave movement. The darker part of the wave is on the down-
palms. This technique will provide a nice contrast between the ward part of the tube, contrary to the upper part of the wave
different layers of vegetation. To give the final touch and get a where there is less water, so the light will go through that part
very pop up green, I spray a light coat of florescent green. of the wave. With the dark blue, I follow the tube movement.
With reduced white, I spray different layers of clouds. To add
With a reduced white I continue slowly rendering the waves. In of palm is done with thin white color; to give more depth to the
the background I add small fine lines as waves and in the fore- vegetation, the last layer of palm is sprayed close to the surface
ground larger more defined lines to add to the percepection of to get less overspray and keep clean edges; the vegetation in
depth. Spraying a very light coat of thinned turquoise blue will the background has fewer hard edges visible. The last stage is
increase the tropical sea color. to give a light green color to my last layer of palms and spray a
The palms are done completely freehand. The first layer of palm light coat of fluorescent green on the entire palm job.
is done with blue and then I spray a coat of transparent yellow The main palm is done by the same technique. I’ve just put a
to give the dark green color, don’t be afraid to work with over- first layer of white leafs to see the position, and then I’ve gone
spray, it will give a nice contrast with the last layer. The last layer from blue to yellow color.
The customer wanted her restaurant logo include in the paint- I spray my wood color. With transparent green and orange,
ing. With transfer paper I protect the sign and cut the differ- I continue to build the logo. With round brush and the same
ent parts out starting with the background, which is to look like green color, I paint the restaurant name. Using the same
wood. With light black, I outline the sign and put in the main technique as with the first palms, I add some vegetation at the
shadows. I spray also the wood grain.With transparent brown, bottom of the sign.
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32